Web Analytics Made Easy - Statcounter
ON AMAZON:



https://www.amazon.com/Voice-Desert-Valerio-Stefano-ebook/dp/B0CJLZ2QY5/

Audiobooks by Valerio Di Stefano: Single Download - Complete Download [TAR] [WIM] [ZIP] [RAR] - Alphabetical Download  [TAR] [WIM] [ZIP] [RAR] - Download Instructions

CLASSICISTRANIERI HOME PAGE - YOUTUBE CHANNEL
SITEMAP
Audiobooks by Valerio Di Stefano: Single Download - Complete Download [TAR] [WIM] [ZIP] [RAR] - Alphabetical Download  [TAR] [WIM] [ZIP] [RAR] - Download Instructions

Make a donation: IBAN: IT36M0708677020000000008016 - BIC/SWIFT:  ICRAITRRU60 - VALERIO DI STEFANO or
Privacy Policy Cookie Policy Terms and Conditions
SystemTap Tapset Reference

SystemTap Tapset Reference

For SystemTap in Red Hat Enterprise Linux 6

Edition 0

Link to Original Document

Red Hat Enterprise Linux Documentation

William Cohen

Engineering Services and Operations Performance Tools

Don Domingo

Engineering Services and Operations Content Services

Legal Notice

This documentation is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License version 2 as published by the Free Software Foundation.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
For more details see the file COPYING in the source distribution of Linux.
Abstract
The Tapset Reference Guide describes the most common tapset definitions users can apply to SystemTap scripts. All included tapsets documented in this guide are current as of the latest upstream version of SystemTap.
Preface
1. Document Conventions
1.1. Typographic Conventions
1.2. Pull-quote Conventions
1.3. Notes and Warnings
2. Getting Help and Giving Feedback
2.1. Do You Need Help?
2.2. We Need Feedback!
1. Introduction
1.1. Documentation Goals
2. Tapset Development Guidelines
2.1. Writing Good Tapsets
2.2. Elements of a Tapset
2.2.1. Tapset Files
2.2.2. Namespace
2.2.3. Comments and Documentation
3. Context Functions
function::print_regs — Print a register dump.
function::execname — Returns the execname of a target process (or group of processes).
function::pid — Returns the ID of a target process.
function::tid — Returns the thread ID of a target process.
function::ppid — Returns the process ID of a target process's parent process.
function::pgrp — Returns the process group ID of the current process.
function::sid — Returns the session ID of the current process.
function::pexecname — Returns the execname of a target process's parent process.
function::gid — Returns the group ID of a target process.
function::egid — Returns the effective gid of a target process.
function::uid — Returns the user ID of a target process.
function::euid — Return the effective uid of a target process.
function::is_myproc — Determines if the current probe point has occurred in the user's own process.
function::cpu — Returns the current cpu number.
function::pp — Returns the active probe point.
function::registers_valid — Determines validity of register and u_register in current context.
function::user_mode — Determines if probe point occurs in user-mode.
function::is_return — Whether the current probe context is a return probe.
function::target — Return the process ID of the target process.
function::module_name — The module name of the current script.
function::stp_pid — The process id of the stapio process.
function::stack_size — Return the size of the kernel stack.
function::stack_used — Returns the amount of kernel stack used.
function::stack_unused — Returns the amount of kernel stack currently available.
function::uaddr — User space address of current running task. EXPERIMENTAL.
function::cmdline_args — Fetch command line arguments from current process
function::cmdline_arg — Fetch a command line argument.
function::cmdline_str — Fetch all command line arguments from current process
function::env_var — Fetch environment variable from current process
function::print_stack — Print out kernel stack from string.
function::sprint_stack — Return stack for kernel addresses from string. EXPERIMENTAL!
function::probefunc — Return the probe point's function name, if known.
function::probemod — Return the probe point's kernel module name.
function::modname — Return the kernel module name loaded at the address.
function::symname — Return the kernel symbol associated with the given address.
function::symdata — Return the kernel symbol and module offset for the address.
function::usymname — Return the symbol of an address in the current task. EXPERIMENTAL!
function::usymdata — Return the symbol and module offset of an address. EXPERIMENTAL!
function::print_ustack — Print out stack for the current task from string. EXPERIMENTAL!
function::sprint_ustack — Return stack for the current task from string. EXPERIMENTAL!
function::print_backtrace — Print stack back trace
function::sprint_backtrace — Return stack back trace as string. EXPERIMENTAL!
function::backtrace — Hex backtrace of current stack
function::task_backtrace — Hex backtrace of an arbitrary task
function::caller — Return name and address of calling function
function::caller_addr — Return caller address
function::print_ubacktrace — Print stack back trace for current task. EXPERIMENTAL!
function::sprint_ubacktrace — Return stack back trace for current task as string. EXPERIMENTAL!
function::print_ubacktrace_brief — Print stack back trace for current task. EXPERIMENTAL!
function::ubacktrace — Hex backtrace of current task stack. EXPERIMENTAL!
function::task_current — The current task_struct of the current task.
function::task_parent — The task_struct of the parent task.
function::task_state — The state of the task.
function::task_execname — The name of the task.
function::task_pid — The process identifier of the task.
function::pid2task — The task_struct of the given process identifier.
function::pid2execname — The name of the given process identifier.
function::task_tid — The thread identifier of the task.
function::task_gid — The group identifier of the task.
function::task_egid — The effective group identifier of the task.
function::task_uid — The user identifier of the task.
function::task_euid — The effective user identifier of the task.
function::task_prio — The priority value of the task.
function::task_nice — The nice value of the task.
function::task_cpu — The scheduled cpu of the task.
function::task_open_file_handles — The number of open files of the task.
function::task_max_file_handles — The max number of open files for the task.
function::pn — Returns the active probe name.
4. Timestamp Functions
function::get_cycles — Processor cycle count.
function::gettimeofday_ns — Number of nanoseconds since UNIX epoch.
function::gettimeofday_us — Number of microseconds since UNIX epoch.
function::gettimeofday_ms — Number of milliseconds since UNIX epoch.
function::gettimeofday_s — Number of seconds since UNIX epoch.
5. Time string utility function
function::ctime — Convert seconds since epoch into human readable date/time string.
6. Memory Tapset
function::vm_fault_contains — Test return value for page fault reason
probe::vm.pagefault — Records that a page fault occurred.
probe::vm.pagefault.return — Indicates what type of fault occurred.
function::addr_to_node — Returns which node a given address belongs to within a NUMA system.
probe::vm.write_shared — Attempts at writing to a shared page.
probe::vm.write_shared_copy — Page copy for shared page write.
probe::vm.mmap — Fires when an mmap is requested.
probe::vm.munmap — Fires when an munmap is requested.
probe::vm.brk — Fires when a brk is requested (i.e. the heap will be resized).
probe::vm.oom_kill — Fires when a thread is selected for termination by the OOM killer.
probe::vm.kmalloc — Fires when kmalloc is requested.
probe::vm.kmem_cache_alloc — Fires when \
probe::vm.kmalloc_node — Fires when kmalloc_node is requested.
probe::vm.kmem_cache_alloc_node — Fires when \
probe::vm.kfree — Fires when kfree is requested.
probe::vm.kmem_cache_free — Fires when \
function::proc_mem_size — Total program virtual memory size in pages
function::proc_mem_size_pid — Total program virtual memory size in pages
function::proc_mem_rss — Program resident set size in pages
function::proc_mem_rss_pid — Program resident set size in pages
function::proc_mem_shr — Program shared pages (from shared mappings)
function::proc_mem_shr_pid — Program shared pages (from shared mappings)
function::proc_mem_txt — Program text (code) size in pages
function::proc_mem_txt_pid — Program text (code) size in pages
function::proc_mem_data — Program data size (data + stack) in pages
function::proc_mem_data_pid — Program data size (data + stack) in pages
function::mem_page_size — Number of bytes in a page for this architecture
function::bytes_to_string — Human readable string for given bytes
function::pages_to_string — Turns pages into a human readable string
function::proc_mem_string — Human readable string of current proc memory usage
function::proc_mem_string_pid — Human readable string of process memory usage
7. Task Time Tapset
function::task_utime — User time of the current task
function::task_utime_tid — User time of the given task
function::task_stime — System time of the current task
function::task_stime_tid — System time of the given task
function::cputime_to_msecs — Translates the given cputime into milliseconds
function::msecs_to_string — Human readable string for given milliseconds
function::cputime_to_string — Human readable string for given cputime
function::task_time_string — Human readable string of task time usage
function::task_time_string_tid — Human readable string of task time usage
8. IO Scheduler and block IO Tapset
probe::ioscheduler.elv_next_request — Fires when a request is retrieved from the request queue
probe::ioscheduler.elv_next_request.return — Fires when a request retrieval issues a return signal
probe::ioscheduler.elv_completed_request — Fires when a request is completed
probe::ioscheduler.elv_add_request.kp — kprobe based probe to indicate that a request was added to the request queue
probe::ioscheduler.elv_add_request.tp — tracepoint based probe to indicate a request is added to the request queue.
probe::ioscheduler.elv_add_request — probe to indicate request is added to the request queue.
probe::ioscheduler_trace.elv_completed_request — Fires when a request is
probe::ioscheduler_trace.elv_issue_request — Fires when a request is
probe::ioscheduler_trace.elv_requeue_request — Fires when a request is
probe::ioscheduler_trace.elv_abort_request — Fires when a request is aborted.
probe::ioscheduler_trace.plug — Fires when a request queue is plugged;
probe::ioscheduler_trace.unplug_io — Fires when a request queue is unplugged;
probe::ioscheduler_trace.unplug_timer — Fires when unplug timer associated
probe::ioblock.request — Fires whenever making a generic block I/O request.
probe::ioblock.end — Fires whenever a block I/O transfer is complete.
probe::ioblock_trace.bounce — Fires whenever a buffer bounce is needed for at least one page of a block IO request.
probe::ioblock_trace.request — Fires just as a generic block I/O request is created for a bio.
probe::ioblock_trace.end — Fires whenever a block I/O transfer is complete.
9. SCSI Tapset
probe::scsi.ioentry — Prepares a SCSI mid-layer request
probe::scsi.iodispatching — SCSI mid-layer dispatched low-level SCSI command
probe::scsi.iodone — SCSI command completed by low level driver and enqueued into the done queue.
probe::scsi.iocompleted — SCSI mid-layer running the completion processing for block device I/O requests
probe::scsi.ioexecute — Create mid-layer SCSI request and wait for the result
probe::scsi.set_state — Order SCSI device state change
10. TTY Tapset
probe::tty.open — Called when a tty is opened
probe::tty.release — Called when the tty is closed
probe::tty.resize — Called when a terminal resize happens
probe::tty.ioctl — called when a ioctl is request to the tty
probe::tty.init — Called when a tty is being initalized
probe::tty.register — Called when a tty device is registred
probe::tty.unregister — Called when a tty device is being unregistered
probe::tty.poll — Called when a tty device is being polled
probe::tty.receive — called when a tty receives a message
probe::tty.write — write to the tty line
probe::tty.read — called when a tty line will be read
11. Networking Tapset
probe::netdev.receive — Data received from network device.
probe::netdev.transmit — Network device transmitting buffer
probe::netdev.change_mtu — Called when the netdev MTU is changed
probe::netdev.open — Called when the device is opened
probe::netdev.close — Called when the device is closed
probe::netdev.hard_transmit — Called when the devices is going to TX (hard)
probe::netdev.rx — Called when the device is going to receive a packet
probe::netdev.change_rx_flag — Called when the device RX flag will be changed
probe::netdev.set_promiscuity — Called when the device enters/leaves promiscuity
probe::netdev.ioctl — Called when the device suffers an IOCTL
probe::netdev.register — Called when the device is registered
probe::netdev.unregister — Called when the device is being unregistered
probe::netdev.get_stats — Called when someone asks the device statistics
probe::netdev.change_mac — Called when the netdev_name has the MAC changed
probe::tcp.sendmsg — Sending a tcp message
probe::tcp.sendmsg.return — Sending TCP message is done
probe::tcp.recvmsg — Receiving TCP message
probe::tcp.recvmsg.return — Receiving TCP message complete
probe::tcp.disconnect — TCP socket disconnection
probe::tcp.disconnect.return — TCP socket disconnection complete
probe::tcp.setsockopt — Call to setsockopt
probe::tcp.setsockopt.return — Return from setsockopt
probe::tcp.receive — Called when a TCP packet is received
probe::udp.sendmsg — Fires whenever a process sends a UDP message
probe::udp.sendmsg.return — Fires whenever an attempt to send a UDP message is completed
probe::udp.recvmsg — Fires whenever a UDP message is received
probe::udp.recvmsg.return — Fires whenever an attempt to receive a UDP message received is completed
probe::udp.disconnect — Fires when a process requests for a UDP disconnection
probe::udp.disconnect.return — UDP has been disconnected successfully
function::ip_ntop — returns a string representation from an integer IP number
12. Socket Tapset
probe::socket.send — Message sent on a socket.
probe::socket.receive — Message received on a socket.
probe::socket.sendmsg — Message is currently being sent on a socket.
probe::socket.sendmsg.return — Return from socket.sendmsg.
probe::socket.recvmsg — Message being received on socket
probe::socket.recvmsg.return — Return from Message being received on socket
probe::socket.aio_write — Message send via sock_aio_write
probe::socket.aio_write.return — Conclusion of message send via sock_aio_write
probe::socket.aio_read — Receiving message via sock_aio_read
probe::socket.aio_read.return — Conclusion of message received via sock_aio_read
probe::socket.writev — Message sent via socket_writev
probe::socket.writev.return — Conclusion of message sent via socket_writev
probe::socket.readv — Receiving a message via sock_readv
probe::socket.readv.return — Conclusion of receiving a message via sock_readv
probe::socket.create — Creation of a socket
probe::socket.create.return — Return from Creation of a socket
probe::socket.close — Close a socket
probe::socket.close.return — Return from closing a socket
function::sock_prot_num2str — Given a protocol number, return a string representation.
function::sock_prot_str2num — Given a protocol name (string), return the corresponding protocol number.
function::sock_fam_num2str — Given a protocol family number, return a string representation.
function::sock_fam_str2num — Given a protocol family name (string), return the corresponding
function::sock_state_num2str — Given a socket state number, return a string representation.
function::sock_state_str2num — Given a socket state string, return the corresponding state number.
13. Kernel Process Tapset
probe::kprocess.create — Fires whenever a new process is successfully created
probe::kprocess.start — Starting new process
probe::kprocess.exec — Attempt to exec to a new program
probe::kprocess.exec_complete — Return from exec to a new program
probe::kprocess.exit — Exit from process
probe::kprocess.release — Process released
14. Signal Tapset
probe::signal.send — Signal being sent to a process
probe::signal.send.return — Signal being sent to a process completed
probe::signal.checkperm — Check being performed on a sent signal
probe::signal.checkperm.return — Check performed on a sent signal completed
probe::signal.wakeup — Sleeping process being wakened for signal
probe::signal.check_ignored — Checking to see signal is ignored
probe::signal.check_ignored.return — Check to see signal is ignored completed
probe::signal.force_segv — Forcing send of SIGSEGV
probe::signal.force_segv.return — Forcing send of SIGSEGV complete
probe::signal.syskill — Sending kill signal to a process
probe::signal.syskill.return — Sending kill signal completed
probe::signal.sys_tkill — Sending a kill signal to a thread
probe::signal.systkill.return — Sending kill signal to a thread completed
probe::signal.sys_tgkill — Sending kill signal to a thread group
probe::signal.sys_tgkill.return — Sending kill signal to a thread group completed
probe::signal.send_sig_queue — Queuing a signal to a process
probe::signal.send_sig_queue.return — Queuing a signal to a process completed
probe::signal.pending — Examining pending signal
probe::signal.pending.return — Examination of pending signal completed
probe::signal.handle — Signal handler being invoked
probe::signal.handle.return — Signal handler invocation completed
probe::signal.do_action — Examining or changing a signal action
probe::signal.do_action.return — Examining or changing a signal action completed
probe::signal.procmask — Examining or changing blocked signals
probe::signal.procmask.return — Examining or changing blocked signals completed
probe::signal.flush — Flushing all pending signals for a task
15. Directory-entry (dentry) Tapset
function::d_name — get the dirent name
function::reverse_path_walk — get the full dirent path
function::task_dentry_path — get the full dentry path
function::d_path — get the full nameidata path
16. Logging Tapset
function::log — Send a line to the common trace buffer.
function::warn — Send a line to the warning stream.
function::exit — Start shutting down probing script.
function::error — Send an error message.
function::ftrace — Send a message to the ftrace ring-buffer.
17. Random functions Tapset
function::randint — Return a random number between [0,n)
18. String and data retrieving functions Tapset
function::kernel_string — Retrieves string from kernel memory.
function::kernel_string2 — Retrieves string from kernel memory with alternative error string.
function::kernel_string_n — Retrieves string of given length from kernel memory.
function::kernel_long — Retrieves a long value stored in kernel memory.
function::kernel_int — Retrieves an int value stored in kernel memory.
function::kernel_short — Retrieves a short value stored in kernel memory.
function::kernel_char — Retrieves a char value stored in kernel memory.
function::kernel_pointer — Retrieves a pointer value stored in kernel memory.
function::user_string — Retrieves string from user space.
function::user_string2 — Retrieves string from user space with alternative error string.
function::user_string_warn — Retrieves string from user space.
function::user_string_quoted — Retrieves and quotes string from user space.
function::user_string_n — Retrieves string of given length from user space.
function::user_string_n2 — Retrieves string of given length from user space.
function::user_string_n_warn — Retrieves string from user space.
function::user_string_n_quoted — Retrieves and quotes string from user space.
function::user_short — Retrieves a short value stored in user space.
function::user_short_warn — Retrieves a short value stored in user space.
function::user_int — Retrieves an int value stored in user space.
function::user_int_warn — Retrieves an int value stored in user space.
function::user_long — Retrieves a long value stored in user space.
function::user_long_warn — Retrieves a long value stored in user space.
function::user_char — Retrieves a char value stored in user space.
function::user_char_warn — Retrieves a char value stored in user space.
19. A collection of standard string functions
function::strlen — Returns the length of a string.
function::substr — Returns a substring.
function::stringat — Returns the char at a given position in the string.
function::isinstr — Returns whether a string is a substring of another string.
function::text_str — Escape any non-printable chars in a string.
function::text_strn — Escape any non-printable chars in a string.
function::tokenize — Return the next non-empty token in a string.
function::str_replace — str_replace Replaces all instances of a substring with another.
function::strtol — strtol - Convert a string to a long.
function::isdigit — Checks for a digit.
20. Utility functions for using ansi control chars in logs
function::ansi_clear_screen — Move cursor to top left and clear screen.
function::ansi_set_color — Set the ansi Select Graphic Rendition mode.
function::ansi_set_color2 — Set the ansi Select Graphic Rendition mode.
function::ansi_set_color3 — Set the ansi Select Graphic Rendition mode.
function::ansi_reset_color — Resets Select Graphic Rendition mode.
function::ansi_new_line — Move cursor to new line.
function::ansi_cursor_move — Move cursor to new coordinates.
function::ansi_cursor_hide — Hides the cursor.
function::ansi_cursor_save — Saves the cursor position.
function::ansi_cursor_restore — Restores a previously saved cursor position.
function::ansi_cursor_show — Shows the cursor.

Preface

1. Document Conventions

This manual uses several conventions to highlight certain words and phrases and draw attention to specific pieces of information.
In PDF and paper editions, this manual uses typefaces drawn from the Liberation Fonts set. The Liberation Fonts set is also used in HTML editions if the set is installed on your system. If not, alternative but equivalent typefaces are displayed. Note: Red Hat Enterprise Linux 5 and later includes the Liberation Fonts set by default.

1.1. Typographic Conventions

Four typographic conventions are used to call attention to specific words and phrases. These conventions, and the circumstances they apply to, are as follows.
Mono-spaced Bold
Used to highlight system input, including shell commands, file names and paths. Also used to highlight keycaps and key combinations. For example:
To see the contents of the file my_next_bestselling_novel in your current working directory, enter the cat my_next_bestselling_novel command at the shell prompt and press Enter to execute the command.
The above includes a file name, a shell command and a keycap, all presented in mono-spaced bold and all distinguishable thanks to context.
Key combinations can be distinguished from keycaps by the hyphen connecting each part of a key combination. For example:
Press Enter to execute the command.
Press Ctrl+Alt+F2 to switch to the first virtual terminal. Press Ctrl+Alt+F1 to return to your X-Windows session.
The first paragraph highlights the particular keycap to press. The second highlights two key combinations (each a set of three keycaps with each set pressed simultaneously).
If source code is discussed, class names, methods, functions, variable names and returned values mentioned within a paragraph will be presented as above, in mono-spaced bold. For example:
File-related classes include filesystem for file systems, file for files, and dir for directories. Each class has its own associated set of permissions.
Proportional Bold
This denotes words or phrases encountered on a system, including application names; dialog box text; labeled buttons; check-box and radio button labels; menu titles and sub-menu titles. For example:
Choose System → Preferences → Mouse from the main menu bar to launch Mouse Preferences. In the Buttons tab, click the Left-handed mouse check box and click Close to switch the primary mouse button from the left to the right (making the mouse suitable for use in the left hand).
To insert a special character into a gedit file, choose Applications → Accessories → Character Map from the main menu bar. Next, choose Search → Find… from the Character Map menu bar, type the name of the character in the Search field and click Next. The character you sought will be highlighted in the Character Table. Double-click this highlighted character to place it in the Text to copy field and then click the Copy button. Now switch back to your document and choose Edit → Paste from the gedit menu bar.
The above text includes application names; system-wide menu names and items; application-specific menu names; and buttons and text found within a GUI interface, all presented in proportional bold and all distinguishable by context.
Mono-spaced Bold Italic or Proportional Bold Italic
Whether mono-spaced bold or proportional bold, the addition of italics indicates replaceable or variable text. Italics denotes text you do not input literally or displayed text that changes depending on circumstance. For example:
To connect to a remote machine using ssh, type ssh username@domain.name at a shell prompt. If the remote machine is example.com and your username on that machine is john, type ssh john@example.com.
The mount -o remount file-system command remounts the named file system. For example, to remount the /home file system, the command is mount -o remount /home.
To see the version of a currently installed package, use the rpm -q package command. It will return a result as follows: package-version-release.
Note the words in bold italics above — username, domain.name, file-system, package, version and release. Each word is a placeholder, either for text you enter when issuing a command or for text displayed by the system.
Aside from standard usage for presenting the title of a work, italics denotes the first use of a new and important term. For example:
Publican is a DocBook publishing system.

1.2. Pull-quote Conventions

Terminal output and source code listings are set off visually from the surrounding text.
Output sent to a terminal is set in mono-spaced roman and presented thus: 
books        Desktop   documentation  drafts  mss    photos   stuff  svn
books_tests  Desktop1  downloads      images  notes  scripts  svgs
Source-code listings are also set in mono-spaced roman but add syntax highlighting as follows: 
package org.jboss.book.jca.ex1;

import javax.naming.InitialContext;

public class ExClient
{
   public static void main(String args[]) 
       throws Exception
   {
      InitialContext iniCtx = new InitialContext();
      Object         ref    = iniCtx.lookup("EchoBean");
      EchoHome       home   = (EchoHome) ref;
      Echo           echo   = home.create();

      System.out.println("Created Echo");

      System.out.println("Echo.echo('Hello') = " + echo.echo("Hello"));
   }
}

1.3. Notes and Warnings

Finally, we use three visual styles to draw attention to information that might otherwise be overlooked.

Note

Notes are tips, shortcuts or alternative approaches to the task at hand. Ignoring a note should have no negative consequences, but you might miss out on a trick that makes your life easier.

Important

Important boxes detail things that are easily missed: configuration changes that only apply to the current session, or services that need restarting before an update will apply. Ignoring a box labeled 'Important' will not cause data loss but may cause irritation and frustration.

Warning

Warnings should not be ignored. Ignoring warnings will most likely cause data loss.

2. Getting Help and Giving Feedback

2.1. Do You Need Help?

If you experience difficulty with a procedure described in this documentation, visit the Red Hat Customer Portal at http://access.redhat.com. Through the customer portal, you can:
  • search or browse through a knowledgebase of technical support articles about Red Hat products.
  • submit a support case to Red Hat Global Support Services (GSS).
  • access other product documentation.
Red Hat also hosts a large number of electronic mailing lists for discussion of Red Hat software and technology. You can find a list of publicly available mailing lists at https://www.redhat.com/mailman/listinfo. Click on the name of any mailing list to subscribe to that list or to access the list archives.

2.2. We Need Feedback!

If you find a typographical error in this manual, or if you have thought of a way to make this manual better, we would love to hear from you! Please submit a report in Bugzilla: http://bugzilla.redhat.com/ against the product Red_Hat_Enterprise_Linux.
When submitting a bug report, be sure to mention the manual's identifier: doc-SystemTap_Tapset_Reference
If you have a suggestion for improving the documentation, try to be as specific as possible when describing it. If you have found an error, please include the section number and some of the surrounding text so we can find it easily.

Chapter 1. Introduction

1.1. Documentation Goals
SystemTap provides free software (GPL) infrastructure to simplify the gathering of information about the running Linux system. This assists diagnosis of a performance or functional problem. SystemTap eliminates the need for the developer to go through the tedious and disruptive instrument, recompile, install, and reboot sequence that may be otherwise required to collect data.
SystemTap provides a simple command line interface and scripting language for writing instrumentation for a live, running kernel. This instrumentation uses probe points and functions provided in the tapset library.
Simply put, tapsets are scripts that encapsulate knowledge about a kernel subsystem into pre-written probes and functions that can be used by other scripts. Tapsets are analogous to libraries for C programs. They hide the underlying details of a kernel area while exposing the key information needed to manage and monitor that aspect of the kernel. They are typically developed by kernel subject-matter experts.
A tapset exposes the high-level data and state transitions of a subsystem. For the most part, good tapset developers assume that SystemTap users know little to nothing about the kernel subsystem's low-level details. As such, tapset developers write tapsets that help ordinary SystemTap users write meaningful and useful SystemTap scripts.

1.1. Documentation Goals

This guide aims to document SystemTap's most useful and common tapset entries; it also contains guidelines on proper tapset development and documentation. The tapset definitions contained in this guide are extracted automatically from properly-formatted comments in the code of each tapset file. As such, any revisions to the definitions in this guide should be applied directly to their respective tapset file.

Chapter 2. Tapset Development Guidelines

2.1. Writing Good Tapsets
2.2. Elements of a Tapset
2.2.1. Tapset Files
2.2.2. Namespace
2.2.3. Comments and Documentation
This chapter describes the upstream guidelines on proper tapset documentation. It also contains information on how to properly document your tapsets, to ensure that they are properly defined in this guide.

2.1. Writing Good Tapsets

The first step to writing good tapsets is to create a simple model of your subject area. For example, a model of the process subsystem might include the following:
Key Data
  • process ID
  • parent process ID
  • process group ID
State Transitions
  • forked
  • exec'd
  • running
  • stopped
  • terminated

Note

Both lists are examples, and are not meant to represent a complete list.
Use your subsystem expertise to find probe points (function entries and exits) that expose the elements of the model, then define probe aliases for those points. Be aware that some state transitions can occur in more than one place. In those cases, an alias can place a probe in multiple locations.
For example, process execs can occur in either the do_execve() or the compat_do_execve() functions. The following alias inserts probes at the beginning of those functions: 
probe kprocess.exec = kernel.function("do_execve"),
kernel.function("compat_do_execve") 
{probe body}
Try to place probes on stable interfaces (i.e., functions that are unlikely to change at the interface level) whenever possible. This will make the tapset less likely to break due to kernel changes. Where kernel version or architecture dependencies are unavoidable, use preprocessor conditionals (see the stap(1) man page for details).
Fill in the probe bodies with the key data available at the probe points. Function entry probes can access the entry parameters specified to the function, while exit probes can access the entry parameters and the return value. Convert the data into meaningful forms where appropriate (e.g., bytes to kilobytes, state values to strings, etc).
You may need to use auxiliary functions to access or convert some of the data. Auxiliary functions often use embedded C to do things that cannot be done in the SystemTap language, like access structure fields in some contexts, follow linked lists, etc. You can use auxiliary functions defined in other tapsets or write your own.
In the following example, copy_process() returns a pointer to the task_struct for the new process. Note that the process ID of the new process is retrieved by calling task_pid() and passing it the task_struct pointer. In this case, the auxiliary function is an embedded C function defined in task.stp. 
probe kprocess.create = kernel.function("copy_process").return 
{
   task = $return
   new_pid = task_pid(task)
}
It is not advisable to write probes for every function. Most SystemTap users will not need or understand them. Keep your tapsets simple and high-level.

2.2. Elements of a Tapset

The following sections describe the most important aspects of writing a tapset. Most of the content herein is suitable for developers who wish to contribute to SystemTap's upstream library of tapsets.

2.2.1. Tapset Files

Tapset files are stored in src/tapset/ of the SystemTap GIT directory. Most tapset files are kept at that level. If you have code that only works with a specific architecture or kernel version, you may choose to put your tapset in the appropriate subdirectory.
Installed tapsets are located in /usr/share/systemtap/tapset/ or /usr/local/share/systemtap/tapset.
Personal tapsets can be stored anywhere. However, to ensure that SystemTap can use them, use -I tapset_directory to specify their location when invoking stap.

2.2.2. Namespace

Probe alias names should take the form tapset_name.probe_name. For example, the probe for sending a signal could be named signal.send.
Global symbol names (probes, functions, and variables) should be unique accross all tapsets. This helps avoid namespace collisions in scripts that use multiple tapsets. To ensure this, use tapset-specific prefixes in your global symbols.
Internal symbol names should be prefixed with an underscore (_).

2.2.3. Comments and Documentation

All probes and functions should include comment blocks that describe their purpose, the data they provide, and the context in which they run (e.g. interrupt, process, etc). Use comments in areas where your intent may not be clear from reading the code.
Note that specially-formatted comments are automatically extracted from most tapsets and included in this guide. This helps ensure that tapset contributors can write their tapset and document it in the same place. The specified format for documenting tapsets is as follows: 
/**
 * probe tapset.name - Short summary of what the tapset does.
 * @argument: Explanation of argument.
 * @argument2: Explanation of argument2. Probes can have multiple arguments.
 *
 * Context:
 * A brief explanation of the tapset context. 
 * Note that the context should only be 1 paragraph short.
 *
 * Text that will appear under "Description."
 *
 * A new paragraph that will also appear under the heading "Description".
 *
 * Header:
 * A paragraph that will appear under the heading "Header".
 **/
For example: 
/**
 * probe vm.write_shared_copy- Page copy for shared page write.
 * @address: The address of the shared write.
 * @zero: Boolean indicating whether it is a zero page
 *         (can do a clear instead of a copy).
 *
 * Context:
 *  The process attempting the write.
 *
 *  Fires when a write to a shared page requires a page copy.  This is
 *  always preceded by a vm.shared_write.
 **/
To override the automatically-generated Synopsis content, use: 
 * Synopsis:
 * New Synopsis string
 *
For example: 
/**
 * probe signal.handle - Fires when the signal handler is invoked
 * @sig: The signal number that invoked the signal handler
 *
 * Synopsis:
 * <programlisting>static int handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 * sigset_t *oldset, struct pt_regs * regs)</programlisting>
 */
It is recommended that you use the <programlisting> tag in this instance, since overriding the Synopsis content of an entry does not automatically form the necessary tags.
For the purposes of improving the DocBook XML output of your comments, you can also use the following XML tags in your comments:
  • command
  • emphasis
  • programlisting
  • remark (tagged strings will appear in Publican beta builds of the document)

Chapter 3. Context Functions

function::print_regs — Print a register dump.
function::execname — Returns the execname of a target process (or group of processes).
function::pid — Returns the ID of a target process.
function::tid — Returns the thread ID of a target process.
function::ppid — Returns the process ID of a target process's parent process.
function::pgrp — Returns the process group ID of the current process.
function::sid — Returns the session ID of the current process.
function::pexecname — Returns the execname of a target process's parent process.
function::gid — Returns the group ID of a target process.
function::egid — Returns the effective gid of a target process.
function::uid — Returns the user ID of a target process.
function::euid — Return the effective uid of a target process.
function::is_myproc — Determines if the current probe point has occurred in the user's own process.
function::cpu — Returns the current cpu number.
function::pp — Returns the active probe point.
function::registers_valid — Determines validity of register and u_register in current context.
function::user_mode — Determines if probe point occurs in user-mode.
function::is_return — Whether the current probe context is a return probe.
function::target — Return the process ID of the target process.
function::module_name — The module name of the current script.
function::stp_pid — The process id of the stapio process.
function::stack_size — Return the size of the kernel stack.
function::stack_used — Returns the amount of kernel stack used.
function::stack_unused — Returns the amount of kernel stack currently available.
function::uaddr — User space address of current running task. EXPERIMENTAL.
function::cmdline_args — Fetch command line arguments from current process
function::cmdline_arg — Fetch a command line argument.
function::cmdline_str — Fetch all command line arguments from current process
function::env_var — Fetch environment variable from current process
function::print_stack — Print out kernel stack from string.
function::sprint_stack — Return stack for kernel addresses from string. EXPERIMENTAL!
function::probefunc — Return the probe point's function name, if known.
function::probemod — Return the probe point's kernel module name.
function::modname — Return the kernel module name loaded at the address.
function::symname — Return the kernel symbol associated with the given address.
function::symdata — Return the kernel symbol and module offset for the address.
function::usymname — Return the symbol of an address in the current task. EXPERIMENTAL!
function::usymdata — Return the symbol and module offset of an address. EXPERIMENTAL!
function::print_ustack — Print out stack for the current task from string. EXPERIMENTAL!
function::sprint_ustack — Return stack for the current task from string. EXPERIMENTAL!
function::print_backtrace — Print stack back trace
function::sprint_backtrace — Return stack back trace as string. EXPERIMENTAL!
function::backtrace — Hex backtrace of current stack
function::task_backtrace — Hex backtrace of an arbitrary task
function::caller — Return name and address of calling function
function::caller_addr — Return caller address
function::print_ubacktrace — Print stack back trace for current task. EXPERIMENTAL!
function::sprint_ubacktrace — Return stack back trace for current task as string. EXPERIMENTAL!
function::print_ubacktrace_brief — Print stack back trace for current task. EXPERIMENTAL!
function::ubacktrace — Hex backtrace of current task stack. EXPERIMENTAL!
function::task_current — The current task_struct of the current task.
function::task_parent — The task_struct of the parent task.
function::task_state — The state of the task.
function::task_execname — The name of the task.
function::task_pid — The process identifier of the task.
function::pid2task — The task_struct of the given process identifier.
function::pid2execname — The name of the given process identifier.
function::task_tid — The thread identifier of the task.
function::task_gid — The group identifier of the task.
function::task_egid — The effective group identifier of the task.
function::task_uid — The user identifier of the task.
function::task_euid — The effective user identifier of the task.
function::task_prio — The priority value of the task.
function::task_nice — The nice value of the task.
function::task_cpu — The scheduled cpu of the task.
function::task_open_file_handles — The number of open files of the task.
function::task_max_file_handles — The max number of open files for the task.
function::pn — Returns the active probe name.
The context functions provide additional information about where an event occurred. These functions can provide information such as a backtrace to where the event occurred and the current register values for the processor.

Name

function::print_regs — Print a register dump.

Synopsis

function print_regs()

Arguments

None

General Syntax

print_regs

Description

This function prints a register dump.

Name

function::execname — Returns the execname of a target process (or group of processes).

Synopsis

function execname:string()

Arguments

None

General Syntax

execname:string

Description

Returns the execname of a target process (or group of processes).

Name

function::pid — Returns the ID of a target process.

Synopsis

function pid:long()

Arguments

None

General Syntax

pid:long

Description

This function returns the ID of a targer process.

Name

function::tid — Returns the thread ID of a target process.

Synopsis

function tid:long()

Arguments

None

General Syntax

tid:long

Description

This function returns the thread ID of the target process.

Name

function::ppid — Returns the process ID of a target process's parent process.

Synopsis

function ppid:long()

Arguments

None

General Syntax

ppid:long

Description

This function return the process ID of the target proccess's parent process.

Name

function::pgrp — Returns the process group ID of the current process.

Synopsis

function pgrp:long()

Arguments

None

General Syntax

pgrp:long

Description

This function returns the process group ID of the current process.

Name

function::sid — Returns the session ID of the current process.

Synopsis

function sid:long()

Arguments

None

General Syntax

sid:long

Description

The session ID of a process is the process group ID of the session leader. Session ID is stored in the signal_struct since Kernel 2.6.0.

Name

function::pexecname — Returns the execname of a target process's parent process.

Synopsis

function pexecname:string()

Arguments

None

General Syntax

pexecname:string

Description

This function returns the execname of a target process's parent procces.

Name

function::gid — Returns the group ID of a target process.

Synopsis

function gid:long()

Arguments

None

General Syntax

gid:long

Description

This function returns the group ID of a target process.

Name

function::egid — Returns the effective gid of a target process.

Synopsis

function egid:long()

Arguments

None

General Syntax

egid:long

Description

This function returns the effective gid of a target process

Name

function::uid — Returns the user ID of a target process.

Synopsis

function uid:long()

Arguments

None

General Syntax

uid:long

Description

This function returns the user ID of the target process.

Name

function::euid — Return the effective uid of a target process.

Synopsis

function euid:long()

Arguments

None

General Syntax

euid:long

Description

Returns the effective user ID of the target process.

Name

function::is_myproc — Determines if the current probe point has occurred in the user's own process.

Synopsis

function is_myproc:long()

Arguments

None

General Syntax

is_myproc:long

Description

This function returns 1 if the current probe point has occurred in the user's own process.

Name

function::cpu — Returns the current cpu number.

Synopsis

function cpu:long()

Arguments

None

General Syntax

cpu:long

Description

This function returns the current cpu number.

Name

function::pp — Returns the active probe point.

Synopsis

function pp:string()

Arguments

None

General Syntax

pp:string

Description

This function returns the fully-resolved probe point associated with a currently running probe handler, including alias and wild-card expansion effects. Context: The current probe point.

Name

function::registers_valid — Determines validity of register and u_register in current context.

Synopsis

function registers_valid:long()

Arguments

None

General Syntax

registers_valid:long

Description

This function returns 1 if register and u_register can be used in the current context, or 0 otherwise. For example, registers_valid returns 0 when called from a begin or end probe.

Name

function::user_mode — Determines if probe point occurs in user-mode.

Synopsis

function user_mode:long()

Arguments

None

General Syntax

user_mode:long
Return 1 if the probe point occurred in user-mode.

Name

function::is_return — Whether the current probe context is a return probe.

Synopsis

function is_return:long()

Arguments

None

General Syntax

is_return:long

Description

Returns 1 if the current probe context is a return probe, returns 0 otherwise.

Name

function::target — Return the process ID of the target process.

Synopsis

function target:long()

Arguments

None

General Syntax

target:long

Description

This function returns the process ID of the target process. This is useful in conjunction with the -x PID or -c CMD command-line options to stap. An example of its use is to create scripts that filter on a specific process.

Name

function::module_name — The module name of the current script.

Synopsis

function module_name:string()

Arguments

None

General Syntax

module_name:string

Description

This function returns the name of the stap module. Either generated randomly (stap_[0-9a-f]+_[0-9a-f]+) or set by stap -m <module_name>.

Name

function::stp_pid — The process id of the stapio process.

Synopsis

function stp_pid:long()

Arguments

None

General Syntax

stp_pid:long

Description

This function returns the process id of the stapio process that launched this script. There could be other SystemTap scripts and stapio processes running on the system.

Name

function::stack_size — Return the size of the kernel stack.

Synopsis

function stack_size:long()

Arguments

None

General Syntax

stack_size:long

Description

This function returns the size of the kernel stack.

Name

function::stack_used — Returns the amount of kernel stack used.

Synopsis

function stack_used:long()

Arguments

None

General Syntax

stack_used:long

Description

This function determines how many bytes are currently used in the kernel stack.

Name

function::stack_unused — Returns the amount of kernel stack currently available.

Synopsis

function stack_unused:long()

Arguments

None

General Syntax

stack_unused:long

Description

This function determines how many bytes are currently available in the kernel stack.

Name

function::uaddr — User space address of current running task. EXPERIMENTAL.

Synopsis

function uaddr:long()

Arguments

None

General Syntax

uaddr:long

Description

Returns the address in userspace that the current task was at when the probe occurred. When the current running task isn't a user space thread, or the address cannot be found, zero is returned. Can be used to see where the current task is combined with usymname or symdata. Often the task will be in the VDSO where it entered the kernel. FIXME - need VDSO tracking support #10080.

Name

function::cmdline_args — Fetch command line arguments from current process

Synopsis

function cmdline_args:string(n:long,m:long,delim:string)

Arguments

n
First argument to get (zero is the command itself)
m
Last argument to get (or minus one for all arguments after n)
delim
String to use to delimit arguments when more than one.

General Syntax

cmdline_args:string(n:long, m:long, delim:string)

Description

Returns arguments from the current process starting with argument number n, up to argument m. If there are less than n arguments, or the arguments cannot be retrieved from the current process, the empty string is returned. If m is smaller than n then all arguments starting from argument n are returned. Argument zero is traditionally the command itself.

Name

function::cmdline_arg — Fetch a command line argument.

Synopsis

function cmdline_arg:string(n:long)

Arguments

n
Argument to get (zero is the command itself)

General Syntax

cmdline_arg:string(n:long)

Description

Returns argument the requested argument from the current process or the empty string when there are not that many arguments or there is a problem retrieving the argument. Argument zero is traditionally the command itself.

Name

function::cmdline_str — Fetch all command line arguments from current process

Synopsis

function cmdline_str:string()

Arguments

None

General Syntax

cmdline_str:string

Description

Returns all arguments from the current process delimited by spaces. Returns the empty string when the arguments cannot be retrieved.

Name

function::env_var — Fetch environment variable from current process

Synopsis

function env_var:string(name:string)

Arguments

name
Name of the environment variable to fetch

General Syntax

evn_var:string(name:string)

Description

Returns the contents of the specified environment value for the current process. If the variable isn't set an empty string is returned.

Name

function::print_stack — Print out kernel stack from string.

Synopsis

function print_stack(stk:string)

Arguments

stk
String with list of hexadecimal addresses.

General Syntax

print_stack(stk:string)

Description

This function performs a symbolic lookup of the addresses in the given string, which is assumed to be the result of a prior call to backtrace.
Print one line per address, including the address, the name of the function containing the address, and an estimate of its position within that function. Return nothing.

Name

function::sprint_stack — Return stack for kernel addresses from string. EXPERIMENTAL!

Synopsis

function sprint_stack:string(stk:string)

Arguments

stk
String with list of hexadecimal (kernel) addresses.

Description

Perform a symbolic lookup of the addresses in the given string, which is assumed to be the result of a prior call to backtrace.
Returns a simple backtrace from the given hex string. One line per address. Includes the symbol name (or hex address if symbol couldn't be resolved) and module name (if found). Includes the offset from the start of the function if found, otherwise the offset will be added to the module (if found, between brackets). Returns the backtrace as string (each line terminated by a newline character). Note that the returned stack will be truncated to MAXSTRINGLEN, to print fuller and richer stacks use print_stack.

Name

function::probefunc — Return the probe point's function name, if known.

Synopsis

function probefunc:string()

Arguments

None

General Syntax

probefunc:string

Description

This function returns the name of the function being probed. It will do this based on the probe point string as returned by pp.

Please note

this function is deprecated, please use symname and/or usymname. This function might return a function name based on the current address if the probe point context couldn't be parsed.

Name

function::probemod — Return the probe point's kernel module name.

Synopsis

function probemod:string()

Arguments

None

General Syntax

probemod:string

Description

This funciton returns the name of the kernel module containing the probe point, if known.

Name

function::modname — Return the kernel module name loaded at the address.

Synopsis

function modname:string(addr:long)

Arguments

addr
The address.

Description

Returns the module name associated with the given address if known. If not known it will return the string “<unknown>”. If the address was not in a kernel module, but in the kernel itself, then the string “kernel” will be returned.

Name

function::symname — Return the kernel symbol associated with the given address.

Synopsis

function symname:string(addr:long)

Arguments

addr
The address to translate.

General Syntax

symname:string(addr:long)

Description

Returns the (function) symbol name associated with the given address if known. If not known it will return the hex string representation of addr.

Name

function::symdata — Return the kernel symbol and module offset for the address.

Synopsis

function symdata:string(addr:long)

Arguments

addr
The address to translate.

General Syntax

symdata:string(addr:long)

Description

Returns the (function) symbol name associated with the given address if known, the offset from the start and size of the symbol, plus module name (between brackets). If symbol is unknown, but module is known, the offset inside the module, plus the size of the module is added. If any element is not known it will be omitted and if the symbol name is unknown it will return the hex string for the given address.

Name

function::usymname — Return the symbol of an address in the current task. EXPERIMENTAL!

Synopsis

function usymname:string(addr:long)

Arguments

addr
The address to translate.

Description

Returns the (function) symbol name associated with the given address if known. If not known it will return the hex string representation of addr.

Name

function::usymdata — Return the symbol and module offset of an address. EXPERIMENTAL!

Synopsis

function usymdata:string(addr:long)

Arguments

addr
The address to translate.

Description

Returns the (function) symbol name associated with the given address in the current task if known, the offset from the start and the size of the symbol, plus the module name (between brackets). If symbol is unknown, but module is known, the offset inside the module, plus the size of the module is added. If any element is not known it will be omitted and if the symbol name is unknown it will return the hex string for the given address.

Name

function::print_ustack — Print out stack for the current task from string. EXPERIMENTAL!

Synopsis

function print_ustack(stk:string)

Arguments

stk
String with list of hexadecimal addresses for the current task.

Description

Perform a symbolic lookup of the addresses in the given string, which is assumed to be the result of a prior call to ubacktrace for the current task.
Print one line per address, including the address, the name of the function containing the address, and an estimate of its position within that function. Return nothing.

Name

function::sprint_ustack — Return stack for the current task from string. EXPERIMENTAL!

Synopsis

function sprint_ustack:string(stk:string)

Arguments

stk
String with list of hexadecimal addresses for the current task.

Description

Perform a symbolic lookup of the addresses in the given string, which is assumed to be the result of a prior call to ubacktrace for the current task.
Returns a simple backtrace from the given hex string. One line per address. Includes the symbol name (or hex address if symbol couldn't be resolved) and module name (if found). Includes the offset from the start of the function if found, otherwise the offset will be added to the module (if found, between brackets). Returns the backtrace as string (each line terminated by a newline character). Note that the returned stack will be truncated to MAXSTRINGLEN, to print fuller and richer stacks use print_ustack.

Name

function::print_backtrace — Print stack back trace

Synopsis

function print_backtrace()

Arguments

None

General Syntax

print_backtrace

Description

This function isEquivalent to print_stack(backtrace), except that deeper stack nesting may be supported. The function does not return a value.

Name

function::sprint_backtrace — Return stack back trace as string. EXPERIMENTAL!

Synopsis

function sprint_backtrace:string()

Arguments

None

Description

Returns a simple (kernel) backtrace. One line per address. Includes the symbol name (or hex address if symbol couldn't be resolved) and module name (if found). Includes the offset from the start of the function if found, otherwise the offset will be added to the module (if found, between brackets). Returns the backtrace as string (each line terminated by a newline character). Note that the returned stack will be truncated to MAXSTRINGLEN, to print fuller and richer stacks use print_backtrace. Equivalent to sprint_stack(backtrace), but more efficient (no need to translate between hex strings and final backtrace string).

Name

function::backtrace — Hex backtrace of current stack

Synopsis

function backtrace:string()

Arguments

None

General Syntax

backtrace:string

Description

This function returns a string of hex addresses that are a backtrace of the stack. Output may be truncated as as per maximum string length (MAXSTRINGLEN).

Name

function::task_backtrace — Hex backtrace of an arbitrary task

Synopsis

function task_backtrace:string(task:long)

Arguments

task
pointer to task_struct

General Syntax

task_backtrace:string(task:long)

Description

This function returns a string of hex addresses that are a backtrace of the stack of a particular task Output may be truncated as per maximum string length.

Name

function::caller — Return name and address of calling function

Synopsis

function caller:string()

Arguments

None

General Syntax

caller:string

Description

This function returns the address and name of the calling function. This is equivalent to calling: sprintf(“s 0xx”, symname(caller_addr, caller_addr)) Works only for return probes at this time.

Name

function::caller_addr — Return caller address

Synopsis

function caller_addr:long()

Arguments

None

General Syntax

caller_addr:long

Description

This function returns the address of the calling function. Works only for return probes at this time.

Name

function::print_ubacktrace — Print stack back trace for current task. EXPERIMENTAL!

Synopsis

function print_ubacktrace()

Arguments

None

Description

Equivalent to print_ustack(ubacktrace), except that deeper stack nesting may be supported. Returns nothing.

Note

To get (full) backtraces for user space applications and shared shared libraries not mentioned in the current script run stap with -d /path/to/exe-or-so and/or add --ldd to load all needed unwind data.

Name

function::sprint_ubacktrace — Return stack back trace for current task as string. EXPERIMENTAL!

Synopsis

function sprint_ubacktrace:string()

Arguments

None

Description

Returns a simple backtrace for the current task. One line per address. Includes the symbol name (or hex address if symbol couldn't be resolved) and module name (if found). Includes the offset from the start of the function if found, otherwise the offset will be added to the module (if found, between brackets). Returns the backtrace as string (each line terminated by a newline character). Note that the returned stack will be truncated to MAXSTRINGLEN, to print fuller and richer stacks use print_ubacktrace. Equivalent to sprint_ustack(ubacktrace), but more efficient (no need to translate between hex strings and final backtrace string).

Note

To get (full) backtraces for user space applications and shared shared libraries not mentioned in the current script run stap with -d /path/to/exe-or-so and/or add --ldd to load all needed unwind data.

Name

function::print_ubacktrace_brief — Print stack back trace for current task. EXPERIMENTAL!

Synopsis

function print_ubacktrace_brief()

Arguments

None

Description

Equivalent to print_ubacktrace, but output for each symbol is shorter (just name and offset, or just the hex address of no symbol could be found).

Note

To get (full) backtraces for user space applications and shared shared libraries not mentioned in the current script run stap with -d /path/to/exe-or-so and/or add --ldd to load all needed unwind data.

Name

function::ubacktrace — Hex backtrace of current task stack. EXPERIMENTAL!

Synopsis

function ubacktrace:string()

Arguments

None

Description

Return a string of hex addresses that are a backtrace of the stack of the current task. Output may be truncated as per maximum string length. Returns empty string when current probe point cannot determine user backtrace.

Note

To get (full) backtraces for user space applications and shared shared libraries not mentioned in the current script run stap with -d /path/to/exe-or-so and/or add --ldd to load all needed unwind data.

Name

function::task_current — The current task_struct of the current task.

Synopsis

function task_current:long()

Arguments

None

General Syntax

task_current:long

Description

This function returns the task_struct representing the current process. This address can be passed to the various task_*() functions to extract more task-specific data.

Name

function::task_parent — The task_struct of the parent task.

Synopsis

function task_parent:long(task:long)

Arguments

task
task_struct pointer.

General Syntax

task_parent:long(task:long)

Description

This function returns the parent task_struct of the given task. This address can be passed to the various task_*() functions to extract more task-specific data.

Name

function::task_state — The state of the task.

Synopsis

function task_state:long(task:long)

Arguments

task
task_struct pointer.

General Syntax

task_state:long(task:long)

Description

Return the state of the given task, one of: TASK_RUNNING (0), TASK_INTERRUPTIBLE (1), TASK_UNINTERRUPTIBLE (2), TASK_STOPPED (4), TASK_TRACED (8), EXIT_ZOMBIE (16), EXIT_DEAD (32).

Name

function::task_execname — The name of the task.

Synopsis

function task_execname:string(task:long)

Arguments

task
task_struct pointer.

General Syntax

task_execname:string(task:long)

Description

Return the name of the given task.

Name

function::task_pid — The process identifier of the task.

Synopsis

function task_pid:long(task:long)

Arguments

task
task_struct pointer.

General Syntax

task_pid:long (task:long)

Description

This fucntion returns the process id of the given task.

Name

function::pid2task — The task_struct of the given process identifier.

Synopsis

function pid2task:long(pid:long)

Arguments

pid
Process identifier.

Description

Return the task struct of the given process id.

Name

function::pid2execname — The name of the given process identifier.

Synopsis

function pid2execname:string(pid:long)

Arguments

pid
Process identifier.

Description

Return the name of the given process id.

Name

function::task_tid — The thread identifier of the task.

Synopsis

function task_tid:long(task:long)

Arguments

task
task_struct pointer.

General Syntax

task_tid:long(task:long)

Description

This function returns the thread id of the given task.

Name

function::task_gid — The group identifier of the task.

Synopsis

function task_gid:long(task:long)

Arguments

task
task_struct pointer.

General Syntax

task_gid:long(task:long)

Description

This function returns the group id of the given task.

Name

function::task_egid — The effective group identifier of the task.

Synopsis

function task_egid:long(task:long)

Arguments

task
task_struct pointer.

General Syntax

task_egid:long(task:long)

Description

This function returns the effective group id of the given task.

Name

function::task_uid — The user identifier of the task.

Synopsis

function task_uid:long(task:long)

Arguments

task
task_struct pointer.

General Syntax

task_uid:long(task:long)

Description

This function returns the user id of the given task.

Name

function::task_euid — The effective user identifier of the task.

Synopsis

function task_euid:long(task:long)

Arguments

task
task_struct pointer.

General Syntax

task_euid:long(task:long)

Description

This function returns the effective user id of the given task.

Name

function::task_prio — The priority value of the task.

Synopsis

function task_prio:long(task:long)

Arguments

task
task_struct pointer.

General Syntax

task_prio:long(task:long)

Description

This function returns the priority value of the given task.

Name

function::task_nice — The nice value of the task.

Synopsis

function task_nice:long(task:long)

Arguments

task
task_struct pointer.

General Syntax

task_nice:long(task:long)

Description

This function returns the nice value of the given task.

Name

function::task_cpu — The scheduled cpu of the task.

Synopsis

function task_cpu:long(task:long)

Arguments

task
task_struct pointer.

General Syntax

task_cpu:long(task:long)

Description

This function returns the scheduled cpu for the given task.

Name

function::task_open_file_handles — The number of open files of the task.

Synopsis

function task_open_file_handles:long(task:long)

Arguments

task
task_struct pointer.

General Syntax

task_open_file_handles:long(task:long)

Description

This function returns the number of open file handlers for the given task.

Name

function::task_max_file_handles — The max number of open files for the task.

Synopsis

function task_max_file_handles:long(task:long)

Arguments

task
task_struct pointer.

General Syntax

task_max_file_handles:long(task:long)

Description

This function returns the maximum number of file handlers for the given task.

Name

function::pn — Returns the active probe name.

Synopsis

function pn:string()

Arguments

None

General Syntax

pn:string

Description

This function returns the script-level probe point associated with a currently running probe handler, including wild-card expansion effects. Context: The current probe point.

Chapter 4. Timestamp Functions

function::get_cycles — Processor cycle count.
function::gettimeofday_ns — Number of nanoseconds since UNIX epoch.
function::gettimeofday_us — Number of microseconds since UNIX epoch.
function::gettimeofday_ms — Number of milliseconds since UNIX epoch.
function::gettimeofday_s — Number of seconds since UNIX epoch.
Each timestamp function returns a value to indicate when a function is executed. These returned values can then be used to indicate when an event occurred, provide an ordering for events, or compute the amount of time elapsed between two time stamps.

Name

function::get_cycles — Processor cycle count.

Synopsis

function get_cycles:long()

Arguments

None

General Syntax

get_cycles:long

Description

This function returns the processor cycle counter value if available, else it returns zero. The cycle counter is free running and unsynchronized on each processor. Thus, the order of events cannot determined by comparing the results of the get_cycles function on different processors.

Name

function::gettimeofday_ns — Number of nanoseconds since UNIX epoch.

Synopsis

function gettimeofday_ns:long()

Arguments

None

General Syntax

gettimeofday_ns:long

Description

This function returns the number of nanoseconds since the UNIX epoch.

Name

function::gettimeofday_us — Number of microseconds since UNIX epoch.

Synopsis

function gettimeofday_us:long()

Arguments

None

General Syntax

gettimeofday_us:long

Description

This function returns the number of microseconds since the UNIX epoch.

Name

function::gettimeofday_ms — Number of milliseconds since UNIX epoch.

Synopsis

function gettimeofday_ms:long()

Arguments

None

General Syntax

gettimeofday_ms:long

Description

This function returns the number of milliseconds since the UNIX epoch.

Name

function::gettimeofday_s — Number of seconds since UNIX epoch.

Synopsis

function gettimeofday_s:long()

Arguments

None

General Syntax

gettimeofday_s:long

Description

This function returns the number of seconds since the UNIX epoch.

Chapter 5. Time string utility function

function::ctime — Convert seconds since epoch into human readable date/time string.
Utility function to turn seconds since the epoch (as returned by the timestamp function gettimeofday_s()) into a human readable date/time string.

Name

function::ctime — Convert seconds since epoch into human readable date/time string.

Synopsis

function ctime:string(epochsecs:long)

Arguments

epochsecs
Number of seconds since epoch (as returned by gettimeofday_s).

General Syntax

ctime:string(epochsecs:long)

Description

Takes an argument of seconds since the epoch as returned by gettimeofday_s. Returns a string of the form
“Wed Jun 30 21:49:08 1993”
The string will always be exactly 24 characters. If the time would be unreasonable far in the past (before what can be represented with a 32 bit offset in seconds from the epoch) the returned string will be “a long, long time ago...”. If the time would be unreasonable far in the future the returned string will be “far far in the future...” (both these strings are also 24 characters wide).
Note that the epoch (zero) corresponds to
“Thu Jan 1 00:00:00 1970”
The earliest full date given by ctime, corresponding to epochsecs -2147483648 is “Fri Dec 13 20:45:52 1901”. The latest full date given by ctime, corresponding to epochsecs 2147483647 is “Tue Jan 19 03:14:07 2038”.
The abbreviations for the days of the week are ‘Sun’, ‘Mon’, ‘Tue’, ‘Wed’, ‘Thu’, ‘Fri’, and ‘Sat’. The abbreviations for the months are ‘Jan’, ‘Feb’, ‘Mar’, ‘Apr’, ‘May’, ‘Jun’, ‘Jul’, ‘Aug’, ‘Sep’, ‘Oct’, ‘Nov’, and ‘Dec’.
Note that the real C library ctime function puts a newline ('\n') character at the end of the string that this function does not. Also note that since the kernel has no concept of timezones, the returned time is always in GMT.

Chapter 6. Memory Tapset

function::vm_fault_contains — Test return value for page fault reason
probe::vm.pagefault — Records that a page fault occurred.
probe::vm.pagefault.return — Indicates what type of fault occurred.
function::addr_to_node — Returns which node a given address belongs to within a NUMA system.
probe::vm.write_shared — Attempts at writing to a shared page.
probe::vm.write_shared_copy — Page copy for shared page write.
probe::vm.mmap — Fires when an mmap is requested.
probe::vm.munmap — Fires when an munmap is requested.
probe::vm.brk — Fires when a brk is requested (i.e. the heap will be resized).
probe::vm.oom_kill — Fires when a thread is selected for termination by the OOM killer.
probe::vm.kmalloc — Fires when kmalloc is requested.
probe::vm.kmem_cache_alloc — Fires when \
probe::vm.kmalloc_node — Fires when kmalloc_node is requested.
probe::vm.kmem_cache_alloc_node — Fires when \
probe::vm.kfree — Fires when kfree is requested.
probe::vm.kmem_cache_free — Fires when \
function::proc_mem_size — Total program virtual memory size in pages
function::proc_mem_size_pid — Total program virtual memory size in pages
function::proc_mem_rss — Program resident set size in pages
function::proc_mem_rss_pid — Program resident set size in pages
function::proc_mem_shr — Program shared pages (from shared mappings)
function::proc_mem_shr_pid — Program shared pages (from shared mappings)
function::proc_mem_txt — Program text (code) size in pages
function::proc_mem_txt_pid — Program text (code) size in pages
function::proc_mem_data — Program data size (data + stack) in pages
function::proc_mem_data_pid — Program data size (data + stack) in pages
function::mem_page_size — Number of bytes in a page for this architecture
function::bytes_to_string — Human readable string for given bytes
function::pages_to_string — Turns pages into a human readable string
function::proc_mem_string — Human readable string of current proc memory usage
function::proc_mem_string_pid — Human readable string of process memory usage
This family of probe points is used to probe memory-related events or query the memory usage of the current process. It contains the following probe points:

Name

function::vm_fault_contains — Test return value for page fault reason

Synopsis

function vm_fault_contains:long(value:long,test:long)

Arguments

value
The fault_type returned by vm.page_fault.return
test
The type of fault to test for (VM_FAULT_OOM or similar)

Name

probe::vm.pagefault — Records that a page fault occurred.

Synopsis

vm.pagefault

Values

write_access
Indicates whether this was a write or read access; 1 indicates a write, while 0 indicates a read.
name
Name of the probe point
address
The address of the faulting memory access; i.e. the address that caused the page fault.

Context

The process which triggered the fault

Name

probe::vm.pagefault.return — Indicates what type of fault occurred.

Synopsis

vm.pagefault.return

Values

name
Name of the probe point
fault_type
Returns either 0 (VM_FAULT_OOM) for out of memory faults, 2 (VM_FAULT_MINOR) for minor faults, 3 (VM_FAULT_MAJOR) for major faults, or 1 (VM_FAULT_SIGBUS) if the fault was neither OOM, minor fault, nor major fault.

Name

function::addr_to_node — Returns which node a given address belongs to within a NUMA system.

Synopsis

function addr_to_node:long(addr:long)

Arguments

addr
The address of the faulting memory access.

General Syntax

addr_to_node:long(addr:long)

Description

This function accepts an address, and returns the node that the given address belongs to in a NUMA system.

Name

probe::vm.write_shared — Attempts at writing to a shared page.

Synopsis

vm.write_shared

Values

name
Name of the probe point
address
The address of the shared write.

Context

The context is the process attempting the write.

Description

Fires when a process attempts to write to a shared page. If a copy is necessary, this will be followed by a vm.write_shared_copy.

Name

probe::vm.write_shared_copy — Page copy for shared page write.

Synopsis

vm.write_shared_copy

Values

name
Name of the probe point
zero
Boolean indicating whether it is a zero page (can do a clear instead of a copy).
address
The address of the shared write.

Context

The process attempting the write.

Description

Fires when a write to a shared page requires a page copy. This is always preceded by a vm.shared_write.

Name

probe::vm.mmap — Fires when an mmap is requested.

Synopsis

vm.mmap

Values

length
The length of the memory segment
name
Name of the probe point
address
The requested address

Context

The process calling mmap.

Name

probe::vm.munmap — Fires when an munmap is requested.

Synopsis

vm.munmap

Values

length
The length of the memory segment
name
Name of the probe point
address
The requested address

Context

The process calling munmap.

Name

probe::vm.brk — Fires when a brk is requested (i.e. the heap will be resized).

Synopsis

vm.brk

Values

length
The length of the memory segment
name
Name of the probe point
address
The requested address

Context

The process calling brk.

Name

probe::vm.oom_kill — Fires when a thread is selected for termination by the OOM killer.

Synopsis

vm.oom_kill

Values

name
Name of the probe point
task
The task being killed

Context

The process that tried to consume excessive memory, and thus triggered the OOM.

Name

probe::vm.kmalloc — Fires when kmalloc is requested.

Synopsis

vm.kmalloc

Values

ptr
Pointer to the kmemory allocated
caller_function
Name of the caller function.
call_site
Address of the kmemory function.
gfp_flag_name
type of kmemory to allocate (in String format)
name
Name of the probe point
bytes_req
Requested Bytes
bytes_alloc
Allocated Bytes
gfp_flags
type of kmemory to allocate

Name

probe::vm.kmem_cache_alloc — Fires when \

Synopsis

vm.kmem_cache_alloc

Values

ptr
Pointer to the kmemory allocated
caller_function
Name of the caller function.
call_site
Address of the function calling this kmemory function.
gfp_flag_name
Type of kmemory to allocate(in string format)
name
Name of the probe point
bytes_req
Requested Bytes
bytes_alloc
Allocated Bytes
gfp_flags
type of kmemory to allocate

Description

kmem_cache_alloc is requested.

Name

probe::vm.kmalloc_node — Fires when kmalloc_node is requested.

Synopsis

vm.kmalloc_node

Values

ptr
Pointer to the kmemory allocated
caller_function
Name of the caller function.
call_site
Address of the function caling this kmemory function.
gfp_flag_name
Type of kmemory to allocate(in string format)
name
Name of the probe point
bytes_req
Requested Bytes
bytes_alloc
Allocated Bytes
gfp_flags
type of kmemory to allocate

Name

probe::vm.kmem_cache_alloc_node — Fires when \

Synopsis

vm.kmem_cache_alloc_node

Values

ptr
Pointer to the kmemory allocated
caller_function
Name of the caller function.
call_site
Address of the function calling this kmemory function.
gfp_flag_name
Type of kmemory to allocate(in string format)
name
Name of the probe point
bytes_req
Requested Bytes
bytes_alloc
Allocated Bytes
gfp_flags
type of kmemory to allocate

Description

kmem_cache_alloc_node is requested.

Name

probe::vm.kfree — Fires when kfree is requested.

Synopsis

vm.kfree

Values

ptr
Pointer to the kmemory allocated which is returned by kmalloc
caller_function
Name of the caller function.
call_site
Address of the function calling this kmemory function.
name
Name of the probe point

Name

probe::vm.kmem_cache_free — Fires when \

Synopsis

vm.kmem_cache_free

Values

ptr
Pointer to the kmemory allocated which is returned by kmem_cache
caller_function
Name of the caller function.
call_site
Address of the function calling this kmemory function.
name
Name of the probe point

Description

kmem_cache_free is requested.

Name

function::proc_mem_size — Total program virtual memory size in pages

Synopsis

function proc_mem_size:long()

Arguments

None

Description

Returns the total virtual memory size in pages of the current process, or zero when there is no current process or the number of pages couldn't be retrieved.

Name

function::proc_mem_size_pid — Total program virtual memory size in pages

Synopsis

function proc_mem_size_pid:long(pid:long)

Arguments

pid
The pid of process to examine

Description

Returns the total virtual memory size in pages of the given process, or zero when that process doesn't exist or the number of pages couldn't be retrieved.

Name

function::proc_mem_rss — Program resident set size in pages

Synopsis

function proc_mem_rss:long()

Arguments

None

Description

Returns the resident set size in pages of the current process, or zero when there is no current process or the number of pages couldn't be retrieved.

Name

function::proc_mem_rss_pid — Program resident set size in pages

Synopsis

function proc_mem_rss_pid:long(pid:long)

Arguments

pid
The pid of process to examine

Description

Returns the resident set size in pages of the given process, or zero when the process doesn't exist or the number of pages couldn't be retrieved.

Name

function::proc_mem_shr — Program shared pages (from shared mappings)

Synopsis

function proc_mem_shr:long()

Arguments

None

Description

Returns the shared pages (from shared mappings) of the current process, or zero when there is no current process or the number of pages couldn't be retrieved.

Name

function::proc_mem_shr_pid — Program shared pages (from shared mappings)

Synopsis

function proc_mem_shr_pid:long(pid:long)

Arguments

pid
The pid of process to examine

Description

Returns the shared pages (from shared mappings) of the given process, or zero when the process doesn't exist or the number of pages couldn't be retrieved.

Name

function::proc_mem_txt — Program text (code) size in pages

Synopsis

function proc_mem_txt:long()

Arguments

None

Description

Returns the current process text (code) size in pages, or zero when there is no current process or the number of pages couldn't be retrieved.

Name

function::proc_mem_txt_pid — Program text (code) size in pages

Synopsis

function proc_mem_txt_pid:long(pid:long)

Arguments

pid
The pid of process to examine

Description

Returns the given process text (code) size in pages, or zero when the process doesn't exist or the number of pages couldn't be retrieved.

Name

function::proc_mem_data — Program data size (data + stack) in pages

Synopsis

function proc_mem_data:long()

Arguments

None

Description

Returns the current process data size (data + stack) in pages, or zero when there is no current process or the number of pages couldn't be retrieved.

Name

function::proc_mem_data_pid — Program data size (data + stack) in pages

Synopsis

function proc_mem_data_pid:long(pid:long)

Arguments

pid
The pid of process to examine

Description

Returns the given process data size (data + stack) in pages, or zero when the process doesn't exist or the number of pages couldn't be retrieved.

Name

function::mem_page_size — Number of bytes in a page for this architecture

Synopsis

function mem_page_size:long()

Arguments

None

Name

function::bytes_to_string — Human readable string for given bytes

Synopsis

function bytes_to_string:string(bytes:long)

Arguments

bytes
Number of bytes to translate.

Description

Returns a string representing the number of bytes (up to 1024 bytes), the number of kilobytes (when less than 1024K) postfixed by 'K', the number of megabytes (when less than 1024M) postfixed by 'M' or the number of gigabytes postfixed by 'G'. If representing K, M or G, and the number is amount is less than 100, it includes a '.' plus the remainer. The returned string will be 5 characters wide (padding with whitespace at the front) unless negative or representing more than 9999G bytes.

Name

function::pages_to_string — Turns pages into a human readable string

Synopsis

function pages_to_string:string(pages:long)

Arguments

pages
Number of pages to translate.

Description

Multiplies pages by page_size to get the number of bytes and returns the result of bytes_to_string.

Name

function::proc_mem_string — Human readable string of current proc memory usage

Synopsis

function proc_mem_string:string()

Arguments

None

Description

Returns a human readable string showing the size, rss, shr, txt and data of the memory used by the current process. For example “size: 301m, rss: 11m, shr: 8m, txt: 52k, data: 2248k”.

Name

function::proc_mem_string_pid — Human readable string of process memory usage

Synopsis

function proc_mem_string_pid:string(pid:long)

Arguments

pid
The pid of process to examine

Description

Returns a human readable string showing the size, rss, shr, txt and data of the memory used by the given process. For example “size: 301m, rss: 11m, shr: 8m, txt: 52k, data: 2248k”.

Chapter 7. Task Time Tapset

function::task_utime — User time of the current task
function::task_utime_tid — User time of the given task
function::task_stime — System time of the current task
function::task_stime_tid — System time of the given task
function::cputime_to_msecs — Translates the given cputime into milliseconds
function::msecs_to_string — Human readable string for given milliseconds
function::cputime_to_string — Human readable string for given cputime
function::task_time_string — Human readable string of task time usage
function::task_time_string_tid — Human readable string of task time usage
This tapset defines utility functions to query time related properties of the current tasks, translate those in miliseconds and human readable strings.

Name

function::task_utime — User time of the current task

Synopsis

function task_utime:long()

Arguments

None

Description

Returns the user time of the current task in cputime. Does not include any time used by other tasks in this process, nor does it include any time of the children of this task.

Name

function::task_utime_tid — User time of the given task

Synopsis

function task_utime_tid:long(tid:long)

Arguments

tid
Thread id of the given task

Description

Returns the user time of the given task in cputime, or zero if the task doesn't exist. Does not include any time used by other tasks in this process, nor does it include any time of the children of this task.

Name

function::task_stime — System time of the current task

Synopsis

function task_stime:long()

Arguments

None

Description

Returns the system time of the current task in cputime. Does not include any time used by other tasks in this process, nor does it include any time of the children of this task.

Name

function::task_stime_tid — System time of the given task

Synopsis

function task_stime_tid:long(tid:long)

Arguments

tid
Thread id of the given task

Description

Returns the system time of the given task in cputime, or zero if the task doesn't exist. Does not include any time used by other tasks in this process, nor does it include any time of the children of this task.

Name

function::cputime_to_msecs — Translates the given cputime into milliseconds

Synopsis

function cputime_to_msecs:long(cputime:long)

Arguments

cputime
Time to convert to milliseconds.

Name

function::msecs_to_string — Human readable string for given milliseconds

Synopsis

function msecs_to_string:string(msecs:long)

Arguments

msecs
Number of milliseconds to translate.

Description

Returns a string representing the number of milliseconds as a human readable string consisting of “XmY.ZZZs”, where X is the number of minutes, Y is the number of seconds and ZZZ is the number of milliseconds.

Name

function::cputime_to_string — Human readable string for given cputime

Synopsis

function cputime_to_string:string(cputime:long)

Arguments

cputime
Time to translate.

Description

Equivalent to calling: msec_to_string (cputime_to_msecs (cputime).

Name

function::task_time_string — Human readable string of task time usage

Synopsis

function task_time_string:string()

Arguments

None

Description

Returns a human readable string showing the user and system time the current task has used up to now. For example “usr: 0m12.908s, sys: 1m6.851s”.

Name

function::task_time_string_tid — Human readable string of task time usage

Synopsis

function task_time_string_tid:string(tid:long)

Arguments

tid
Thread id of the given task

Description

Returns a human readable string showing the user and system time the given task has used up to now. For example “usr: 0m12.908s, sys: 1m6.851s”.

Chapter 8. IO Scheduler and block IO Tapset

probe::ioscheduler.elv_next_request — Fires when a request is retrieved from the request queue
probe::ioscheduler.elv_next_request.return — Fires when a request retrieval issues a return signal
probe::ioscheduler.elv_completed_request — Fires when a request is completed
probe::ioscheduler.elv_add_request.kp — kprobe based probe to indicate that a request was added to the request queue
probe::ioscheduler.elv_add_request.tp — tracepoint based probe to indicate a request is added to the request queue.
probe::ioscheduler.elv_add_request — probe to indicate request is added to the request queue.
probe::ioscheduler_trace.elv_completed_request — Fires when a request is
probe::ioscheduler_trace.elv_issue_request — Fires when a request is
probe::ioscheduler_trace.elv_requeue_request — Fires when a request is
probe::ioscheduler_trace.elv_abort_request — Fires when a request is aborted.
probe::ioscheduler_trace.plug — Fires when a request queue is plugged;
probe::ioscheduler_trace.unplug_io — Fires when a request queue is unplugged;
probe::ioscheduler_trace.unplug_timer — Fires when unplug timer associated
probe::ioblock.request — Fires whenever making a generic block I/O request.
probe::ioblock.end — Fires whenever a block I/O transfer is complete.
probe::ioblock_trace.bounce — Fires whenever a buffer bounce is needed for at least one page of a block IO request.
probe::ioblock_trace.request — Fires just as a generic block I/O request is created for a bio.
probe::ioblock_trace.end — Fires whenever a block I/O transfer is complete.
This family of probe points is used to probe block IO layer and IO scheduler activities. It contains the following probe points:

Name

probe::ioscheduler.elv_next_request — Fires when a request is retrieved from the request queue

Synopsis

ioscheduler.elv_next_request

Values

name
Name of the probe point
elevator_name
The type of I/O elevator currently enabled

Name

probe::ioscheduler.elv_next_request.return — Fires when a request retrieval issues a return signal

Synopsis

ioscheduler.elv_next_request.return

Values

disk_major
Disk major number of the request
rq
Address of the request
name
Name of the probe point
disk_minor
Disk minor number of the request
rq_flags
Request flags

Name

probe::ioscheduler.elv_completed_request — Fires when a request is completed

Synopsis

ioscheduler.elv_completed_request

Values

disk_major
Disk major number of the request
rq
Address of the request
name
Name of the probe point
elevator_name
The type of I/O elevator currently enabled
disk_minor
Disk minor number of the request
rq_flags
Request flags

Name

probe::ioscheduler.elv_add_request.kp — kprobe based probe to indicate that a request was added to the request queue

Synopsis

ioscheduler.elv_add_request.kp

Values

disk_major
Disk major number of the request
rq
Address of the request
q
pointer to request queue
name
Name of the probe point
elevator_name
The type of I/O elevator currently enabled
disk_minor
Disk minor number of the request
rq_flags
Request flags

Name

probe::ioscheduler.elv_add_request.tp — tracepoint based probe to indicate a request is added to the request queue.

Synopsis

ioscheduler.elv_add_request.tp

Values

disk_major
Disk major no of request.
rq
Address of request.
q
Pointer to request queue.
name
Name of the probe point
elevator_name
The type of I/O elevator currently enabled.
disk_minor
Disk minor number of request.
rq_flags
Request flags.

Name

probe::ioscheduler.elv_add_request — probe to indicate request is added to the request queue.

Synopsis

ioscheduler.elv_add_request

Values

disk_major
Disk major no of request.
rq
Address of request.
q
Pointer to request queue.
elevator_name
The type of I/O elevator currently enabled.
disk_minor
Disk minor number of request.
rq_flags
Request flags.

Name

probe::ioscheduler_trace.elv_completed_request — Fires when a request is

Synopsis

ioscheduler_trace.elv_completed_request

Values

disk_major
Disk major no of request.
rq
Address of request.
name
Name of the probe point
elevator_name
The type of I/O elevator currently enabled.
disk_minor
Disk minor number of request.
rq_flags
Request flags.

Description

completed.

Name

probe::ioscheduler_trace.elv_issue_request — Fires when a request is

Synopsis

ioscheduler_trace.elv_issue_request

Values

disk_major
Disk major no of request.
rq
Address of request.
name
Name of the probe point
elevator_name
The type of I/O elevator currently enabled.
disk_minor
Disk minor number of request.
rq_flags
Request flags.

Description

scheduled.

Name

probe::ioscheduler_trace.elv_requeue_request — Fires when a request is

Synopsis

ioscheduler_trace.elv_requeue_request

Values

disk_major
Disk major no of request.
rq
Address of request.
name
Name of the probe point
elevator_name
The type of I/O elevator currently enabled.
disk_minor
Disk minor number of request.
rq_flags
Request flags.

Description

put back on the queue, when the hadware cannot accept more requests.

Name

probe::ioscheduler_trace.elv_abort_request — Fires when a request is aborted.

Synopsis

ioscheduler_trace.elv_abort_request

Values

disk_major
Disk major no of request.
rq
Address of request.
name
Name of the probe point
elevator_name
The type of I/O elevator currently enabled.
disk_minor
Disk minor number of request.
rq_flags
Request flags.

Name

probe::ioscheduler_trace.plug — Fires when a request queue is plugged;

Synopsis

ioscheduler_trace.plug

Values

name
Name of the probe point
rq_queue
request queue

Description

ie, requests in the queue cannot be serviced by block driver.

Name

probe::ioscheduler_trace.unplug_io — Fires when a request queue is unplugged;

Synopsis

ioscheduler_trace.unplug_io

Values

name
Name of the probe point
rq_queue
request queue

Description

Either, when number of pending requests in the queue exceeds threshold or, upon expiration of timer that was activated when queue was plugged.

Name

probe::ioscheduler_trace.unplug_timer — Fires when unplug timer associated

Synopsis

ioscheduler_trace.unplug_timer

Values

name
Name of the probe point
rq_queue
request queue

Description

with a request queue expires.

Name

probe::ioblock.request — Fires whenever making a generic block I/O request.

Synopsis

ioblock.request

Values

None

Description

name - name of the probe point devname - block device name ino - i-node number of the mapped file sector - beginning sector for the entire bio flags - see below BIO_UPTODATE 0 ok after I/O completion BIO_RW_BLOCK 1 RW_AHEAD set, and read/write would block BIO_EOF 2 out-out-bounds error BIO_SEG_VALID 3 nr_hw_seg valid BIO_CLONED 4 doesn't own data BIO_BOUNCED 5 bio is a bounce bio BIO_USER_MAPPED 6 contains user pages BIO_EOPNOTSUPP 7 not supported
rw - binary trace for read/write request vcnt - bio vector count which represents number of array element (page, offset, length) which make up this I/O request idx - offset into the bio vector array phys_segments - number of segments in this bio after physical address coalescing is performed hw_segments - number of segments after physical and DMA remapping hardware coalescing is performed size - total size in bytes bdev - target block device bdev_contains - points to the device object which contains the partition (when bio structure represents a partition) p_start_sect - points to the start sector of the partition structure of the device

Context

The process makes block I/O request

Name

probe::ioblock.end — Fires whenever a block I/O transfer is complete.

Synopsis

ioblock.end

Values

None

Description

name - name of the probe point devname - block device name ino - i-node number of the mapped file bytes_done - number of bytes transferred sector - beginning sector for the entire bio flags - see below BIO_UPTODATE 0 ok after I/O completion BIO_RW_BLOCK 1 RW_AHEAD set, and read/write would block BIO_EOF 2 out-out-bounds error BIO_SEG_VALID 3 nr_hw_seg valid BIO_CLONED 4 doesn't own data BIO_BOUNCED 5 bio is a bounce bio BIO_USER_MAPPED 6 contains user pages BIO_EOPNOTSUPP 7 not supported error - 0 on success rw - binary trace for read/write request vcnt - bio vector count which represents number of array element (page, offset, length) which makes up this I/O request idx - offset into the bio vector array phys_segments - number of segments in this bio after physical address coalescing is performed. hw_segments - number of segments after physical and DMA remapping hardware coalescing is performed size - total size in bytes

Context

The process signals the transfer is done.

Name

probe::ioblock_trace.bounce — Fires whenever a buffer bounce is needed for at least one page of a block IO request.

Synopsis

ioblock_trace.bounce

Values

None

Description

name - name of the probe point q - request queue on which this bio was queued. devname - device for which a buffer bounce was needed. ino - i-node number of the mapped file bytes_done - number of bytes transferred sector - beginning sector for the entire bio flags - see below BIO_UPTODATE 0 ok after I/O completion BIO_RW_BLOCK 1 RW_AHEAD set, and read/write would block BIO_EOF 2 out-out-bounds error BIO_SEG_VALID 3 nr_hw_seg valid BIO_CLONED 4 doesn't own data BIO_BOUNCED 5 bio is a bounce bio BIO_USER_MAPPED 6 contains user pages BIO_EOPNOTSUPP 7 not supported rw - binary trace for read/write request vcnt - bio vector count which represents number of array element (page, offset, length) which makes up this I/O request idx - offset into the bio vector array phys_segments - number of segments in this bio after physical address coalescing is performed. size - total size in bytes bdev - target block device bdev_contains - points to the device object which contains the partition (when bio structure represents a partition) p_start_sect - points to the start sector of the partition structure of the device

Context

The process creating a block IO request.

Name

probe::ioblock_trace.request — Fires just as a generic block I/O request is created for a bio.

Synopsis

ioblock_trace.request

Values

None

Description

name - name of the probe point q - request queue on which this bio was queued. devname - block device name ino - i-node number of the mapped file bytes_done - number of bytes transferred sector - beginning sector for the entire bio flags - see below BIO_UPTODATE 0 ok after I/O completion BIO_RW_BLOCK 1 RW_AHEAD set, and read/write would block BIO_EOF 2 out-out-bounds error BIO_SEG_VALID 3 nr_hw_seg valid BIO_CLONED 4 doesn't own data BIO_BOUNCED 5 bio is a bounce bio BIO_USER_MAPPED 6 contains user pages BIO_EOPNOTSUPP 7 not supported
rw - binary trace for read/write request vcnt - bio vector count which represents number of array element (page, offset, length) which make up this I/O request idx - offset into the bio vector array phys_segments - number of segments in this bio after physical address coalescing is performed. size - total size in bytes bdev - target block device bdev_contains - points to the device object which contains the partition (when bio structure represents a partition) p_start_sect - points to the start sector of the partition structure of the device

Context

The process makes block I/O request

Name

probe::ioblock_trace.end — Fires whenever a block I/O transfer is complete.

Synopsis

ioblock_trace.end

Values

None

Description

name - name of the probe point q - request queue on which this bio was queued. devname - block device name ino - i-node number of the mapped file bytes_done - number of bytes transferred sector - beginning sector for the entire bio flags - see below BIO_UPTODATE 0 ok after I/O completion BIO_RW_BLOCK 1 RW_AHEAD set, and read/write would block BIO_EOF 2 out-out-bounds error BIO_SEG_VALID 3 nr_hw_seg valid BIO_CLONED 4 doesn't own data BIO_BOUNCED 5 bio is a bounce bio BIO_USER_MAPPED 6 contains user pages BIO_EOPNOTSUPP 7 not supported
rw - binary trace for read/write request vcnt - bio vector count which represents number of array element (page, offset, length) which makes up this I/O request idx - offset into the bio vector array phys_segments - number of segments in this bio after physical address coalescing is performed. size - total size in bytes bdev - target block device bdev_contains - points to the device object which contains the partition (when bio structure represents a partition) p_start_sect - points to the start sector of the partition structure of the device

Context

The process signals the transfer is done.

Chapter 9. SCSI Tapset

probe::scsi.ioentry — Prepares a SCSI mid-layer request
probe::scsi.iodispatching — SCSI mid-layer dispatched low-level SCSI command
probe::scsi.iodone — SCSI command completed by low level driver and enqueued into the done queue.
probe::scsi.iocompleted — SCSI mid-layer running the completion processing for block device I/O requests
probe::scsi.ioexecute — Create mid-layer SCSI request and wait for the result
probe::scsi.set_state — Order SCSI device state change
This family of probe points is used to probe SCSI activities. It contains the following probe points:

Name

probe::scsi.ioentry — Prepares a SCSI mid-layer request

Synopsis

scsi.ioentry

Values

disk_major
The major number of the disk (-1 if no information)
device_state_str
The current state of the device, as a string
device_state
The current state of the device
req_addr
The current struct request pointer, as a number
disk_minor
The minor number of the disk (-1 if no information)

Name

probe::scsi.iodispatching — SCSI mid-layer dispatched low-level SCSI command

Synopsis

scsi.iodispatching

Values

device_state_str
The current state of the device, as a string
dev_id
The scsi device id
channel
The channel number
data_direction
The data_direction specifies whether this command is from/to the device 0 (DMA_BIDIRECTIONAL), 1 (DMA_TO_DEVICE), 2 (DMA_FROM_DEVICE), 3 (DMA_NONE)
lun
The lun number
request_bufflen
The request buffer length
host_no
The host number
device_state
The current state of the device
data_direction_str
Data direction, as a string
req_addr
The current struct request pointer, as a number
request_buffer
The request buffer address

Name

probe::scsi.iodone — SCSI command completed by low level driver and enqueued into the done queue.

Synopsis

scsi.iodone

Values

device_state_str
The current state of the device, as a string
dev_id
The scsi device id
channel
The channel number
data_direction
The data_direction specifies whether this command is from/to the device.
lun
The lun number
host_no
The host number
data_direction_str
Data direction, as a string
device_state
The current state of the device
scsi_timer_pending
1 if a timer is pending on this request
req_addr
The current struct request pointer, as a number

Name

probe::scsi.iocompleted — SCSI mid-layer running the completion processing for block device I/O requests

Synopsis

scsi.iocompleted

Values

device_state_str
The current state of the device, as a string
dev_id
The scsi device id
channel
The channel number
data_direction
The data_direction specifies whether this command is from/to the device
lun
The lun number
host_no
The host number
data_direction_str
Data direction, as a string
device_state
The current state of the device
req_addr
The current struct request pointer, as a number
goodbytes
The bytes completed

Name

probe::scsi.ioexecute — Create mid-layer SCSI request and wait for the result

Synopsis

scsi.ioexecute

Values

retries
Number of times to retry request
device_state_str
The current state of the device, as a string
dev_id
The scsi device id
channel
The channel number
data_direction
The data_direction specifies whether this command is from/to the device.
lun
The lun number
timeout
Request timeout in seconds
request_bufflen
The data buffer buffer length
host_no
The host number
data_direction_str
Data direction, as a string
device_state
The current state of the device
request_buffer
The data buffer address

Name

probe::scsi.set_state — Order SCSI device state change

Synopsis

scsi.set_state

Values

state_str
The new state of the device, as a string
dev_id
The scsi device id
channel
The channel number
state
The new state of the device
old_state_str
The current state of the device, as a string
lun
The lun number
old_state
The current state of the device
host_no
The host number

Chapter 10. TTY Tapset

probe::tty.open — Called when a tty is opened
probe::tty.release — Called when the tty is closed
probe::tty.resize — Called when a terminal resize happens
probe::tty.ioctl — called when a ioctl is request to the tty
probe::tty.init — Called when a tty is being initalized
probe::tty.register — Called when a tty device is registred
probe::tty.unregister — Called when a tty device is being unregistered
probe::tty.poll — Called when a tty device is being polled
probe::tty.receive — called when a tty receives a message
probe::tty.write — write to the tty line
probe::tty.read — called when a tty line will be read
This family of probe points is used to probe TTY (Teletype) activities. It contains the following probe points:

Name

probe::tty.open — Called when a tty is opened

Synopsis

tty.open

Values

inode_state
the inode state
file_name
the file name
file_mode
the file mode
file_flags
the file flags
inode_number
the inode number
inode_flags
the inode flags

Name

probe::tty.release — Called when the tty is closed

Synopsis

tty.release

Values

inode_state
the inode state
file_name
the file name
file_mode
the file mode
file_flags
the file flags
inode_number
the inode number
inode_flags
the inode flags

Name

probe::tty.resize — Called when a terminal resize happens

Synopsis

tty.resize

Values

new_ypixel
the new ypixel value
old_col
the old col value
old_xpixel
the old xpixel
old_ypixel
the old ypixel
name
the tty name
old_row
the old row value
new_row
the new row value
new_xpixel
the new xpixel value
new_col
the new col value

Name

probe::tty.ioctl — called when a ioctl is request to the tty

Synopsis

tty.ioctl

Values

cmd
the ioctl command
arg
the ioctl argument
name
the file name

Name

probe::tty.init — Called when a tty is being initalized

Synopsis

tty.init

Values

driver_name
the driver name
name
the driver .dev_name name
module
the module name

Name

probe::tty.register — Called when a tty device is registred

Synopsis

tty.register

Values

driver_name
the driver name
name
the driver .dev_name name
index
the tty index requested
module
the module name

Name

probe::tty.unregister — Called when a tty device is being unregistered

Synopsis

tty.unregister

Values

driver_name
the driver name
name
the driver .dev_name name
index
the tty index requested
module
the module name

Name

probe::tty.poll — Called when a tty device is being polled

Synopsis

tty.poll

Values

file_name
the tty file name
wait_key
the wait queue key

Name

probe::tty.receive — called when a tty receives a message

Synopsis

tty.receive

Values

driver_name
the driver name
count
The amount of characters received
name
the name of the module file
fp
The flag buffer
cp
the buffer that was received
index
The tty Index
id
the tty id

Name

probe::tty.write — write to the tty line

Synopsis

tty.write

Values

driver_name
the driver name
buffer
the buffer that will be written
file_name
the file name lreated to the tty
nr
The amount of characters

Name

probe::tty.read — called when a tty line will be read

Synopsis

tty.read

Values

driver_name
the driver name
buffer
the buffer that will receive the characters
file_name
the file name lreated to the tty
nr
The amount of characters to be read

Chapter 11. Networking Tapset

probe::netdev.receive — Data received from network device.
probe::netdev.transmit — Network device transmitting buffer
probe::netdev.change_mtu — Called when the netdev MTU is changed
probe::netdev.open — Called when the device is opened
probe::netdev.close — Called when the device is closed
probe::netdev.hard_transmit — Called when the devices is going to TX (hard)
probe::netdev.rx — Called when the device is going to receive a packet
probe::netdev.change_rx_flag — Called when the device RX flag will be changed
probe::netdev.set_promiscuity — Called when the device enters/leaves promiscuity
probe::netdev.ioctl — Called when the device suffers an IOCTL
probe::netdev.register — Called when the device is registered
probe::netdev.unregister — Called when the device is being unregistered
probe::netdev.get_stats — Called when someone asks the device statistics
probe::netdev.change_mac — Called when the netdev_name has the MAC changed
probe::tcp.sendmsg — Sending a tcp message
probe::tcp.sendmsg.return — Sending TCP message is done
probe::tcp.recvmsg — Receiving TCP message
probe::tcp.recvmsg.return — Receiving TCP message complete
probe::tcp.disconnect — TCP socket disconnection
probe::tcp.disconnect.return — TCP socket disconnection complete
probe::tcp.setsockopt — Call to setsockopt
probe::tcp.setsockopt.return — Return from setsockopt
probe::tcp.receive — Called when a TCP packet is received
probe::udp.sendmsg — Fires whenever a process sends a UDP message
probe::udp.sendmsg.return — Fires whenever an attempt to send a UDP message is completed
probe::udp.recvmsg — Fires whenever a UDP message is received
probe::udp.recvmsg.return — Fires whenever an attempt to receive a UDP message received is completed
probe::udp.disconnect — Fires when a process requests for a UDP disconnection
probe::udp.disconnect.return — UDP has been disconnected successfully
function::ip_ntop — returns a string representation from an integer IP number
This family of probe points is used to probe the activities of the network device and protocol layers.

Name

probe::netdev.receive — Data received from network device.

Synopsis

netdev.receive

Values

protocol
Protocol of received packet.
dev_name
The name of the device. e.g: eth0, ath1.
length
The length of the receiving buffer.

Name

probe::netdev.transmit — Network device transmitting buffer

Synopsis

netdev.transmit

Values

protocol
The protocol of this packet(defined in include/linux/if_ether.h).
dev_name
The name of the device. e.g: eth0, ath1.
length
The length of the transmit buffer.
truesize
The size of the data to be transmitted.

Name

probe::netdev.change_mtu — Called when the netdev MTU is changed

Synopsis

netdev.change_mtu

Values

dev_name
The device that will have the MTU changed
new_mtu
The new MTU
old_mtu
The current MTU

Name

probe::netdev.open — Called when the device is opened

Synopsis

netdev.open

Values

dev_name
The device that is going to be opened

Name

probe::netdev.close — Called when the device is closed

Synopsis

netdev.close

Values

dev_name
The device that is going to be closed

Name

probe::netdev.hard_transmit — Called when the devices is going to TX (hard)

Synopsis

netdev.hard_transmit

Values

protocol
The protocol used in the transmission
dev_name
The device scheduled to transmit
length
The length of the transmit buffer.
truesize
The size of the data to be transmitted.

Name

probe::netdev.rx — Called when the device is going to receive a packet

Synopsis

netdev.rx

Values

protocol
The packet protocol
dev_name
The device received the packet

Name

probe::netdev.change_rx_flag — Called when the device RX flag will be changed

Synopsis

netdev.change_rx_flag

Values

dev_name
The device that will be changed
flags
The new flags

Name

probe::netdev.set_promiscuity — Called when the device enters/leaves promiscuity

Synopsis

netdev.set_promiscuity

Values

dev_name
The device that is entering/leaving promiscuity mode
enable
If the device is entering promiscuity mode
inc
Count the number of promiscuity openers
disable
If the device is leaving promiscuity mode

Name

probe::netdev.ioctl — Called when the device suffers an IOCTL

Synopsis

netdev.ioctl

Values

cmd
The IOCTL request
arg
The IOCTL argument (usually the netdev interface)

Name

probe::netdev.register — Called when the device is registered

Synopsis

netdev.register

Values

dev_name
The device that is going to be registered

Name

probe::netdev.unregister — Called when the device is being unregistered

Synopsis

netdev.unregister

Values

dev_name
The device that is going to be unregistered

Name

probe::netdev.get_stats — Called when someone asks the device statistics

Synopsis

netdev.get_stats

Values

dev_name
The device that is going to provide the statistics

Name

probe::netdev.change_mac — Called when the netdev_name has the MAC changed

Synopsis

netdev.change_mac

Values

dev_name
The device that will have the MTU changed
new_mac
The new MAC address
mac_len
The MAC length
old_mac
The current MAC address

Name

probe::tcp.sendmsg — Sending a tcp message

Synopsis

tcp.sendmsg

Values

name
Name of this probe
size
Number of bytes to send
sock
Network socket

Context

The process which sends a tcp message

Name

probe::tcp.sendmsg.return — Sending TCP message is done

Synopsis

tcp.sendmsg.return

Values

name
Name of this probe
size
Number of bytes sent or error code if an error occurred.

Context

The process which sends a tcp message

Name

probe::tcp.recvmsg — Receiving TCP message

Synopsis

tcp.recvmsg

Values

saddr
A string representing the source IP address
daddr
A string representing the destination IP address
name
Name of this probe
sport
TCP source port
dport
TCP destination port
size
Number of bytes to be received
sock
Network socket

Context

The process which receives a tcp message

Name

probe::tcp.recvmsg.return — Receiving TCP message complete

Synopsis

tcp.recvmsg.return

Values

saddr
A string representing the source IP address
daddr
A string representing the destination IP address
name
Name of this probe
sport
TCP source port
dport
TCP destination port
size
Number of bytes received or error code if an error occurred.

Context

The process which receives a tcp message

Name

probe::tcp.disconnect — TCP socket disconnection

Synopsis

tcp.disconnect

Values

saddr
A string representing the source IP address
daddr
A string representing the destination IP address
flags
TCP flags (e.g. FIN, etc)
name
Name of this probe
sport
TCP source port
dport
TCP destination port
sock
Network socket

Context

The process which disconnects tcp

Name

probe::tcp.disconnect.return — TCP socket disconnection complete

Synopsis

tcp.disconnect.return

Values

ret
Error code (0: no error)
name
Name of this probe

Context

The process which disconnects tcp

Name

probe::tcp.setsockopt — Call to setsockopt

Synopsis

tcp.setsockopt

Values

optstr
Resolves optname to a human-readable format
level
The level at which the socket options will be manipulated
optlen
Used to access values for setsockopt
name
Name of this probe
optname
TCP socket options (e.g. TCP_NODELAY, TCP_MAXSEG, etc)
sock
Network socket

Context

The process which calls setsockopt

Name

probe::tcp.setsockopt.return — Return from setsockopt

Synopsis

tcp.setsockopt.return

Values

ret
Error code (0: no error)
name
Name of this probe

Context

The process which calls setsockopt

Name

probe::tcp.receive — Called when a TCP packet is received

Synopsis

tcp.receive

Values

urg
TCP URG flag
protocol
Packet protocol from driver
psh
TCP PSH flag
name
Name of the probe point
rst
TCP RST flag
dport
TCP destination port
saddr
A string representing the source IP address
daddr
A string representing the destination IP address
ack
TCP ACK flag
fin
TCP FIN flag
syn
TCP SYN flag
sport
TCP source port
iphdr
IP header address

Name

probe::udp.sendmsg — Fires whenever a process sends a UDP message

Synopsis

udp.sendmsg

Values

name
The name of this probe
size
Number of bytes sent by the process
sock
Network socket used by the process

Context

The process which sent a UDP message

Name

probe::udp.sendmsg.return — Fires whenever an attempt to send a UDP message is completed

Synopsis

udp.sendmsg.return

Values

name
The name of this probe
size
Number of bytes sent by the process

Context

The process which sent a UDP message

Name

probe::udp.recvmsg — Fires whenever a UDP message is received

Synopsis

udp.recvmsg

Values

name
The name of this probe
size
Number of bytes received by the process
sock
Network socket used by the process

Context

The process which received a UDP message

Name

probe::udp.recvmsg.return — Fires whenever an attempt to receive a UDP message received is completed

Synopsis

udp.recvmsg.return

Values

name
The name of this probe
size
Number of bytes received by the process

Context

The process which received a UDP message

Name

probe::udp.disconnect — Fires when a process requests for a UDP disconnection

Synopsis

udp.disconnect

Values

flags
Flags (e.g. FIN, etc)
name
The name of this probe
sock
Network socket used by the process

Context

The process which requests a UDP disconnection

Name

probe::udp.disconnect.return — UDP has been disconnected successfully

Synopsis

udp.disconnect.return

Values

ret
Error code (0: no error)
name
The name of this probe

Context

The process which requested a UDP disconnection

Name

function::ip_ntop — returns a string representation from an integer IP number

Synopsis

function ip_ntop:string(addr:long)

Arguments

addr
the ip represented as an integer

Chapter 12. Socket Tapset

probe::socket.send — Message sent on a socket.
probe::socket.receive — Message received on a socket.
probe::socket.sendmsg — Message is currently being sent on a socket.
probe::socket.sendmsg.return — Return from socket.sendmsg.
probe::socket.recvmsg — Message being received on socket
probe::socket.recvmsg.return — Return from Message being received on socket
probe::socket.aio_write — Message send via sock_aio_write
probe::socket.aio_write.return — Conclusion of message send via sock_aio_write
probe::socket.aio_read — Receiving message via sock_aio_read
probe::socket.aio_read.return — Conclusion of message received via sock_aio_read
probe::socket.writev — Message sent via socket_writev
probe::socket.writev.return — Conclusion of message sent via socket_writev
probe::socket.readv — Receiving a message via sock_readv
probe::socket.readv.return — Conclusion of receiving a message via sock_readv
probe::socket.create — Creation of a socket
probe::socket.create.return — Return from Creation of a socket
probe::socket.close — Close a socket
probe::socket.close.return — Return from closing a socket
function::sock_prot_num2str — Given a protocol number, return a string representation.
function::sock_prot_str2num — Given a protocol name (string), return the corresponding protocol number.
function::sock_fam_num2str — Given a protocol family number, return a string representation.
function::sock_fam_str2num — Given a protocol family name (string), return the corresponding
function::sock_state_num2str — Given a socket state number, return a string representation.
function::sock_state_str2num — Given a socket state string, return the corresponding state number.
This family of probe points is used to probe socket activities. It contains the following probe points:

Name

probe::socket.send — Message sent on a socket.

Synopsis

socket.send

Values

success
Was send successful? (1 = yes, 0 = no)
protocol
Protocol value
flags
Socket flags value
name
Name of this probe
state
Socket state value
size
Size of message sent (in bytes) or error code if success = 0
type
Socket type value
family
Protocol family value

Context

The message sender

Name

probe::socket.receive — Message received on a socket.

Synopsis

socket.receive

Values

success
Was send successful? (1 = yes, 0 = no)
protocol
Protocol value
flags
Socket flags value
name
Name of this probe
state
Socket state value
size
Size of message received (in bytes) or error code if success = 0
type
Socket type value
family
Protocol family value

Context

The message receiver

Name

probe::socket.sendmsg — Message is currently being sent on a socket.

Synopsis

socket.sendmsg

Values

protocol
Protocol value
flags
Socket flags value
name
Name of this probe
state
Socket state value
size
Message size in bytes
type
Socket type value
family
Protocol family value

Context

The message sender

Description

Fires at the beginning of sending a message on a socket via the sock_sendmsg function

Name

probe::socket.sendmsg.return — Return from socket.sendmsg.

Synopsis

socket.sendmsg.return

Values

success
Was send successful? (1 = yes, 0 = no)
protocol
Protocol value
flags
Socket flags value
name
Name of this probe
state
Socket state value
size
Size of message sent (in bytes) or error code if success = 0
type
Socket type value
family
Protocol family value

Context

The message sender.

Description

Fires at the conclusion of sending a message on a socket via the sock_sendmsg function

Name

probe::socket.recvmsg — Message being received on socket

Synopsis

socket.recvmsg

Values

protocol
Protocol value
flags
Socket flags value
name
Name of this probe
state
Socket state value
size
Message size in bytes
type
Socket type value
family
Protocol family value

Context

The message receiver.

Description

Fires at the beginning of receiving a message on a socket via the sock_recvmsg function

Name

probe::socket.recvmsg.return — Return from Message being received on socket

Synopsis

socket.recvmsg.return

Values

success
Was receive successful? (1 = yes, 0 = no)
protocol
Protocol value
flags
Socket flags value
name
Name of this probe
state
Socket state value
size
Size of message received (in bytes) or error code if success = 0
type
Socket type value
family
Protocol family value

Context

The message receiver.

Description

Fires at the conclusion of receiving a message on a socket via the sock_recvmsg function.

Name

probe::socket.aio_write — Message send via sock_aio_write

Synopsis

socket.aio_write

Values

protocol
Protocol value
flags
Socket flags value
name
Name of this probe
state
Socket state value
size
Message size in bytes
type
Socket type value
family
Protocol family value

Context

The message sender

Description

Fires at the beginning of sending a message on a socket via the sock_aio_write function

Name

probe::socket.aio_write.return — Conclusion of message send via sock_aio_write

Synopsis

socket.aio_write.return

Values

success
Was receive successful? (1 = yes, 0 = no)
protocol
Protocol value
flags
Socket flags value
name
Name of this probe
state
Socket state value
size
Size of message received (in bytes) or error code if success = 0
type
Socket type value
family
Protocol family value

Context

The message receiver.

Description

Fires at the conclusion of sending a message on a socket via the sock_aio_write function

Name

probe::socket.aio_read — Receiving message via sock_aio_read

Synopsis

socket.aio_read

Values

protocol
Protocol value
flags
Socket flags value
name
Name of this probe
state
Socket state value
size
Message size in bytes
type
Socket type value
family
Protocol family value

Context

The message sender

Description

Fires at the beginning of receiving a message on a socket via the sock_aio_read function

Name

probe::socket.aio_read.return — Conclusion of message received via sock_aio_read

Synopsis

socket.aio_read.return

Values

success
Was receive successful? (1 = yes, 0 = no)
protocol
Protocol value
flags
Socket flags value
name
Name of this probe
state
Socket state value
size
Size of message received (in bytes) or error code if success = 0
type
Socket type value
family
Protocol family value

Context

The message receiver.

Description

Fires at the conclusion of receiving a message on a socket via the sock_aio_read function

Name

probe::socket.writev — Message sent via socket_writev

Synopsis

socket.writev

Values

protocol
Protocol value
flags
Socket flags value
name
Name of this probe
state
Socket state value
size
Message size in bytes
type
Socket type value
family
Protocol family value

Context

The message sender

Description

Fires at the beginning of sending a message on a socket via the sock_writev function

Name

probe::socket.writev.return — Conclusion of message sent via socket_writev

Synopsis

socket.writev.return

Values

success
Was send successful? (1 = yes, 0 = no)
protocol
Protocol value
flags
Socket flags value
name
Name of this probe
state
Socket state value
size
Size of message sent (in bytes) or error code if success = 0
type
Socket type value
family
Protocol family value

Context

The message receiver.

Description

Fires at the conclusion of sending a message on a socket via the sock_writev function

Name

probe::socket.readv — Receiving a message via sock_readv

Synopsis

socket.readv

Values

protocol
Protocol value
flags
Socket flags value
name
Name of this probe
state
Socket state value
size
Message size in bytes
type
Socket type value
family
Protocol family value

Context

The message sender

Description

Fires at the beginning of receiving a message on a socket via the sock_readv function

Name

probe::socket.readv.return — Conclusion of receiving a message via sock_readv

Synopsis

socket.readv.return

Values

success
Was receive successful? (1 = yes, 0 = no)
protocol
Protocol value
flags
Socket flags value
name
Name of this probe
state
Socket state value
size
Size of message received (in bytes) or error code if success = 0
type
Socket type value
family
Protocol family value

Context

The message receiver.

Description

Fires at the conclusion of receiving a message on a socket via the sock_readv function

Name

probe::socket.create — Creation of a socket

Synopsis

socket.create

Values

protocol
Protocol value
name
Name of this probe
requester
Requested by user process or the kernel (1 = kernel, 0 = user)
type
Socket type value
family
Protocol family value

Context

The requester (see requester variable)

Description

Fires at the beginning of creating a socket.

Name

probe::socket.create.return — Return from Creation of a socket

Synopsis

socket.create.return

Values

success
Was socket creation successful? (1 = yes, 0 = no)
protocol
Protocol value
err
Error code if success == 0
name
Name of this probe
requester
Requested by user process or the kernel (1 = kernel, 0 = user)
type
Socket type value
family
Protocol family value

Context

The requester (user process or kernel)

Description

Fires at the conclusion of creating a socket.

Name

probe::socket.close — Close a socket

Synopsis

socket.close

Values

protocol
Protocol value
flags
Socket flags value
name
Name of this probe
state
Socket state value
type
Socket type value
family
Protocol family value

Context

The requester (user process or kernel)

Description

Fires at the beginning of closing a socket.

Name

probe::socket.close.return — Return from closing a socket

Synopsis

socket.close.return

Values

name
Name of this probe

Context

The requester (user process or kernel)

Description

Fires at the conclusion of closing a socket.

Name

function::sock_prot_num2str — Given a protocol number, return a string representation.

Synopsis

function sock_prot_num2str:string(proto:long)

Arguments

proto
The protocol number.

Name

function::sock_prot_str2num — Given a protocol name (string), return the corresponding protocol number.

Synopsis

function sock_prot_str2num:long(proto:string)

Arguments

proto
The protocol name.

Name

function::sock_fam_num2str — Given a protocol family number, return a string representation.

Synopsis

function sock_fam_num2str:string(family:long)

Arguments

family
The family number.

Name

function::sock_fam_str2num — Given a protocol family name (string), return the corresponding

Synopsis

function sock_fam_str2num:long(family:string)

Arguments

family
The family name.

Description

protocol family number.

Name

function::sock_state_num2str — Given a socket state number, return a string representation.

Synopsis

function sock_state_num2str:string(state:long)

Arguments

state
The state number.

Name

function::sock_state_str2num — Given a socket state string, return the corresponding state number.

Synopsis

function sock_state_str2num:long(state:string)

Arguments

state
The state name.

Chapter 13. Kernel Process Tapset

probe::kprocess.create — Fires whenever a new process is successfully created
probe::kprocess.start — Starting new process
probe::kprocess.exec — Attempt to exec to a new program
probe::kprocess.exec_complete — Return from exec to a new program
probe::kprocess.exit — Exit from process
probe::kprocess.release — Process released
This family of probe points is used to probe process-related activities. It contains the following probe points:

Name

probe::kprocess.create — Fires whenever a new process is successfully created

Synopsis

kprocess.create

Values

new_pid
The PID of the newly created process

Context

Parent of the created process.

Description

Fires whenever a new process is successfully created, either as a result of fork (or one of its syscall variants), or a new kernel thread.

Name

probe::kprocess.start — Starting new process

Synopsis

kprocess.start

Values

None

Context

Newly created process.

Description

Fires immediately before a new process begins execution.

Name

probe::kprocess.exec — Attempt to exec to a new program

Synopsis

kprocess.exec

Values

filename
The path to the new executable

Context

The caller of exec.

Description

Fires whenever a process attempts to exec to a new program.

Name

probe::kprocess.exec_complete — Return from exec to a new program

Synopsis

kprocess.exec_complete

Values

success
A boolean indicating whether the exec was successful
errno
The error number resulting from the exec

Context

On success, the context of the new executable. On failure, remains in the context of the caller.

Description

Fires at the completion of an exec call.

Name

probe::kprocess.exit — Exit from process

Synopsis

kprocess.exit

Values

code
The exit code of the process

Context

The process which is terminating.

Description

Fires when a process terminates. This will always be followed by a kprocess.release, though the latter may be delayed if the process waits in a zombie state.

Name

probe::kprocess.release — Process released

Synopsis

kprocess.release

Values

pid
PID of the process being released
task
A task handle to the process being released

Context

The context of the parent, if it wanted notification of this process' termination, else the context of the process itself.

Description

Fires when a process is released from the kernel. This always follows a kprocess.exit, though it may be delayed somewhat if the process waits in a zombie state.

Chapter 14. Signal Tapset

probe::signal.send — Signal being sent to a process
probe::signal.send.return — Signal being sent to a process completed
probe::signal.checkperm — Check being performed on a sent signal
probe::signal.checkperm.return — Check performed on a sent signal completed
probe::signal.wakeup — Sleeping process being wakened for signal
probe::signal.check_ignored — Checking to see signal is ignored
probe::signal.check_ignored.return — Check to see signal is ignored completed
probe::signal.force_segv — Forcing send of SIGSEGV
probe::signal.force_segv.return — Forcing send of SIGSEGV complete
probe::signal.syskill — Sending kill signal to a process
probe::signal.syskill.return — Sending kill signal completed
probe::signal.sys_tkill — Sending a kill signal to a thread
probe::signal.systkill.return — Sending kill signal to a thread completed
probe::signal.sys_tgkill — Sending kill signal to a thread group
probe::signal.sys_tgkill.return — Sending kill signal to a thread group completed
probe::signal.send_sig_queue — Queuing a signal to a process
probe::signal.send_sig_queue.return — Queuing a signal to a process completed
probe::signal.pending — Examining pending signal
probe::signal.pending.return — Examination of pending signal completed
probe::signal.handle — Signal handler being invoked
probe::signal.handle.return — Signal handler invocation completed
probe::signal.do_action — Examining or changing a signal action
probe::signal.do_action.return — Examining or changing a signal action completed
probe::signal.procmask — Examining or changing blocked signals
probe::signal.procmask.return — Examining or changing blocked signals completed
probe::signal.flush — Flushing all pending signals for a task
This family of probe points is used to probe signal activities. It contains the following probe points:

Name

probe::signal.send — Signal being sent to a process

Synopsis

signal.send

Values

send2queue
Indicates whether the signal is sent to an existing sigqueue
name
The name of the function used to send out the signal
task
A task handle to the signal recipient
sinfo
The address of siginfo struct
si_code
Indicates the signal type
sig_name
A string representation of the signal
sig
The number of the signal
shared
Indicates whether the signal is shared by the thread group
sig_pid
The PID of the process receiving the signal
pid_name
The name of the signal recipient

Context

The signal's sender.

Name

probe::signal.send.return — Signal being sent to a process completed

Synopsis

signal.send.return

Values

retstr
The return value to either __group_send_sig_info, specific_send_sig_info, or send_sigqueue
send2queue
Indicates whether the sent signal was sent to an existing sigqueue
name
The name of the function used to send out the signal
shared
Indicates whether the sent signal is shared by the thread group.

Context

The signal's sender. (correct?)

Description

Possible __group_send_sig_info and specific_send_sig_info return values are as follows;
0 -- The signal is sucessfully sent to a process,

which means that

(1) the signal was ignored by the receiving process, (2) this is a non-RT signal and the system already has one queued, and (3) the signal was successfully added to the sigqueue of the receiving process.
-EAGAIN -- The sigqueue of the receiving process is overflowing, the signal was RT, and the signal was sent by a user using something other than kill.
Possible send_group_sigqueue and send_sigqueue return values are as follows;
0 -- The signal was either sucessfully added into the sigqueue of the receiving process, or a SI_TIMER entry is already queued (in which case, the overrun count will be simply incremented).
1 -- The signal was ignored by the receiving process.
-1 -- (send_sigqueue only) The task was marked exiting, allowing * posix_timer_event to redirect it to the group leader.

Name

probe::signal.checkperm — Check being performed on a sent signal

Synopsis

signal.checkperm

Values

name
Name of the probe point
task
A task handle to the signal recipient
sinfo
The address of the siginfo structure
si_code
Indicates the signal type
sig_name
A string representation of the signal
sig
The number of the signal
pid_name
Name of the process receiving the signal
sig_pid
The PID of the process receiving the signal

Name

probe::signal.checkperm.return — Check performed on a sent signal completed

Synopsis

signal.checkperm.return

Values

retstr
Return value as a string
name
Name of the probe point

Name

probe::signal.wakeup — Sleeping process being wakened for signal

Synopsis

signal.wakeup

Values

resume
Indicates whether to wake up a task in a STOPPED or TRACED state
state_mask
A string representation indicating the mask of task states to wake. Possible values are TASK_INTERRUPTIBLE, TASK_STOPPED, TASK_TRACED, and TASK_INTERRUPTIBLE.
pid_name
Name of the process to wake
sig_pid
The PID of the process to wake

Name

probe::signal.check_ignored — Checking to see signal is ignored

Synopsis

signal.check_ignored

Values

sig_name
A string representation of the signal
sig
The number of the signal
pid_name
Name of the process receiving the signal
sig_pid
The PID of the process receiving the signal

Name

probe::signal.check_ignored.return — Check to see signal is ignored completed

Synopsis

signal.check_ignored.return

Values

retstr
Return value as a string
name
Name of the probe point

Name

probe::signal.force_segv — Forcing send of SIGSEGV

Synopsis

signal.force_segv

Values

name
Name of the probe point
sig_name
A string representation of the signal
sig
The number of the signal
pid_name
Name of the process receiving the signal
sig_pid
The PID of the process receiving the signal

Name

probe::signal.force_segv.return — Forcing send of SIGSEGV complete

Synopsis

signal.force_segv.return

Values

retstr
Return value as a string
name
Name of the probe point

Name

probe::signal.syskill — Sending kill signal to a process

Synopsis

signal.syskill

Values

name
Name of the probe point
sig_name
A string representation of the signal
sig
The specific signal sent to the process
pid_name
The name of the signal recipient
sig_pid
The PID of the process receiving the signal

Name

probe::signal.syskill.return — Sending kill signal completed

Synopsis

signal.syskill.return

Values

None

Name

probe::signal.sys_tkill — Sending a kill signal to a thread

Synopsis

signal.sys_tkill

Values

name
Name of the probe point
sig_name
A string representation of the signal
sig
The specific signal sent to the process
pid_name
The name of the signal recipient
sig_pid
The PID of the process receiving the kill signal

Description

The tkill call is analogous to kill(2), except that it also allows a process within a specific thread group to be targeted. Such processes are targeted through their unique thread IDs (TID).

Name

probe::signal.systkill.return — Sending kill signal to a thread completed

Synopsis

signal.systkill.return

Values

retstr
The return value to either __group_send_sig_info,
name
Name of the probe point

Name

probe::signal.sys_tgkill — Sending kill signal to a thread group

Synopsis

signal.sys_tgkill

Values

name
Name of the probe point
sig_name
A string representation of the signal
sig
The specific kill signal sent to the process
tgid
The thread group ID of the thread receiving the kill signal
pid_name
The name of the signal recipient
sig_pid
The PID of the thread receiving the kill signal

Description

The tgkill call is similar to tkill, except that it also allows the caller to specify the thread group ID of the thread to be signalled. This protects against TID reuse.

Name

probe::signal.sys_tgkill.return — Sending kill signal to a thread group completed

Synopsis

signal.sys_tgkill.return

Values

retstr
The return value to either __group_send_sig_info,
name
Name of the probe point

Name

probe::signal.send_sig_queue — Queuing a signal to a process

Synopsis

signal.send_sig_queue

Values

sigqueue_addr
The address of the signal queue
name
Name of the probe point
sig_name
A string representation of the signal
sig
The queued signal
pid_name
Name of the process to which the signal is queued
sig_pid
The PID of the process to which the signal is queued

Name

probe::signal.send_sig_queue.return — Queuing a signal to a process completed

Synopsis

signal.send_sig_queue.return

Values

retstr
Return value as a string
name
Name of the probe point

Name

probe::signal.pending — Examining pending signal

Synopsis

signal.pending

Values

name
Name of the probe point
sigset_size
The size of the user-space signal set
sigset_add
The address of the user-space signal set (sigset_t)

Description

This probe is used to examine a set of signals pending for delivery to a specific thread. This normally occurs when the do_sigpending kernel function is executed.

Name

probe::signal.pending.return — Examination of pending signal completed

Synopsis

signal.pending.return

Values

retstr
Return value as a string
name
Name of the probe point

Name

probe::signal.handle — Signal handler being invoked

Synopsis

signal.handle

Values

regs
The address of the kernel-mode stack area
sig_code
The si_code value of the siginfo signal
name
Name of the probe point
sig_mode
Indicates whether the signal was a user-mode or kernel-mode signal
sinfo
The address of the siginfo table
sig_name
A string representation of the signal
oldset_addr
The address of the bitmask array of blocked signals
sig
The signal number that invoked the signal handler
ka_addr
The address of the k_sigaction table associated with the signal

Name

probe::signal.handle.return — Signal handler invocation completed

Synopsis

signal.handle.return

Values

retstr
Return value as a string
name
Name of the probe point

Name

probe::signal.do_action — Examining or changing a signal action

Synopsis

signal.do_action

Values

sa_mask
The new mask of the signal
name
Name of the probe point
sig_name
A string representation of the signal
oldsigact_addr
The address of the old sigaction struct associated with the signal
sig
The signal to be examined/changed
sa_handler
The new handler of the signal
sigact_addr
The address of the new sigaction struct associated with the signal

Name

probe::signal.do_action.return — Examining or changing a signal action completed

Synopsis

signal.do_action.return

Values

retstr
Return value as a string
name
Name of the probe point

Name

probe::signal.procmask — Examining or changing blocked signals

Synopsis

signal.procmask

Values

how
Indicates how to change the blocked signals; possible values are SIG_BLOCK=0 (for blocking signals), SIG_UNBLOCK=1 (for unblocking signals), and SIG_SETMASK=2 for setting the signal mask.
name
Name of the probe point
oldsigset_addr
The old address of the signal set (sigset_t)
sigset
The actual value to be set for sigset_t (correct?)
sigset_addr
The address of the signal set (sigset_t) to be implemented

Name

probe::signal.procmask.return — Examining or changing blocked signals completed

Synopsis

signal.procmask.return

Values

retstr
Return value as a string
name
Name of the probe point

Name

probe::signal.flush — Flushing all pending signals for a task

Synopsis

signal.flush

Values

name
Name of the probe point
task
The task handler of the process performing the flush
pid_name
The name of the process associated with the task performing the flush
sig_pid
The PID of the process associated with the task performing the flush

Chapter 15. Directory-entry (dentry) Tapset

function::d_name — get the dirent name
function::reverse_path_walk — get the full dirent path
function::task_dentry_path — get the full dentry path
function::d_path — get the full nameidata path
This family of functions is used to map kernel VFS directory entry pointers to file or full path names.

Name

function::d_name — get the dirent name

Synopsis

function d_name:string(dentry:long)

Arguments

dentry
Pointer to dentry.

Description

Returns the dirent name (path basename).

Name

function::reverse_path_walk — get the full dirent path

Synopsis

function reverse_path_walk:string(dentry:long)

Arguments

dentry
Pointer to dentry.

Description

Returns the path name (partial path to mount point).

Name

function::task_dentry_path — get the full dentry path

Synopsis

function task_dentry_path:string(task:long,dentry:long,vfsmnt:long)

Arguments

task
task_struct pointer.
dentry
direntry pointer.
vfsmnt
vfsmnt pointer.

Description

Returns the full dirent name (full path to the root), like the kernel d_path function.

Name

function::d_path — get the full nameidata path

Synopsis

function d_path:string(nd:long)

Arguments

nd
Pointer to nameidata.

Description

Returns the full dirent name (full path to the root), like the kernel d_path function.

Chapter 16. Logging Tapset

function::log — Send a line to the common trace buffer.
function::warn — Send a line to the warning stream.
function::exit — Start shutting down probing script.
function::error — Send an error message.
function::ftrace — Send a message to the ftrace ring-buffer.
This family of functions is used to send simple message strings to various destinations.

Name

function::log — Send a line to the common trace buffer.

Synopsis

function log(msg:string)

Arguments

msg
The formatted message string.

General Syntax

log(msg:string)

Description

This function logs data. log sends the message immediately to staprun and to the bulk transport (relayfs) if it is being used. If the last character given is not a newline, then one is added. This function is not as effecient as printf and should be used only for urgent messages.

Name

function::warn — Send a line to the warning stream.

Synopsis

function warn(msg:string)

Arguments

msg
The formatted message string.

General Syntax

warn (msg:string)

Description

This function sends a warning message immediately to staprun. It is also sent over the bulk transport (relayfs) if it is being used. If the last characater is not a newline, the one is added.

Name

function::exit — Start shutting down probing script.

Synopsis

function exit()

Arguments

None

General Syntax

exit

Description

This only enqueues a request to start shutting down the script. New probes will not fire (except “end” probes), but all currently running ones may complete their work.

Name

function::error — Send an error message.

Synopsis

function error(msg:string)

Arguments

msg
The formatted message string.

Description

An implicit end-of-line is added. staprun prepends the string “ERROR:”. Sending an error message aborts the currently running probe. Depending on the MAXERRORS parameter, it may trigger an exit.

Name

function::ftrace — Send a message to the ftrace ring-buffer.

Synopsis

function ftrace(msg:string)

Arguments

msg
The formatted message string.

Description

If the ftrace ring-buffer is configured & available, see /debugfs/tracing/trace for the message. Otherwise, the message may be quietly dropped. An implicit end-of-line is added.

Chapter 17. Random functions Tapset

function::randint — Return a random number between [0,n)
These functions deal with random number generation.

Name

function::randint — Return a random number between [0,n)

Synopsis

function randint:long(n:long)

Arguments

n
Number past upper limit of range, not larger than 2**20.

Chapter 18. String and data retrieving functions Tapset

function::kernel_string — Retrieves string from kernel memory.
function::kernel_string2 — Retrieves string from kernel memory with alternative error string.
function::kernel_string_n — Retrieves string of given length from kernel memory.
function::kernel_long — Retrieves a long value stored in kernel memory.
function::kernel_int — Retrieves an int value stored in kernel memory.
function::kernel_short — Retrieves a short value stored in kernel memory.
function::kernel_char — Retrieves a char value stored in kernel memory.
function::kernel_pointer — Retrieves a pointer value stored in kernel memory.
function::user_string — Retrieves string from user space.
function::user_string2 — Retrieves string from user space with alternative error string.
function::user_string_warn — Retrieves string from user space.
function::user_string_quoted — Retrieves and quotes string from user space.
function::user_string_n — Retrieves string of given length from user space.
function::user_string_n2 — Retrieves string of given length from user space.
function::user_string_n_warn — Retrieves string from user space.
function::user_string_n_quoted — Retrieves and quotes string from user space.
function::user_short — Retrieves a short value stored in user space.
function::user_short_warn — Retrieves a short value stored in user space.
function::user_int — Retrieves an int value stored in user space.
function::user_int_warn — Retrieves an int value stored in user space.
function::user_long — Retrieves a long value stored in user space.
function::user_long_warn — Retrieves a long value stored in user space.
function::user_char — Retrieves a char value stored in user space.
function::user_char_warn — Retrieves a char value stored in user space.
Functions to retrieve strings and other primitive types from the kernel or a user space programs based on addresses. All strings are of a maximum length given by MAXSTRINGLEN.

Name

function::kernel_string — Retrieves string from kernel memory.

Synopsis

function kernel_string:string(addr:long)

Arguments

addr
The kernel address to retrieve the string from.

General Syntax

kernel_string:string(addr:long)

Description

This function returns the null terminated C string from a given kernel memory address. Reports an error on string copy fault.

Name

function::kernel_string2 — Retrieves string from kernel memory with alternative error string.

Synopsis

function kernel_string2:string(addr:long,err_msg:string)

Arguments

addr
The kernel address to retrieve the string from.
err_msg
The error message to return when data isn't available.

General Syntax

kernel_string2:string(addr:long, err_msg:string)

Description

This function returns the null terminated C string from a given kernel memory address. Reports the given error message on string copy fault.

Name

function::kernel_string_n — Retrieves string of given length from kernel memory.

Synopsis

function kernel_string_n:string(addr:long,n:long)

Arguments

addr
The kernel address to retrieve the string from.
n
The maximum length of the string (if not null terminated).

General Syntax

kernel_string_n:string(addr:long, n:long)

Description

Returns the C string of a maximum given length from a given kernel memory address. Reports an error on string copy fault.

Name

function::kernel_long — Retrieves a long value stored in kernel memory.

Synopsis

function kernel_long:long(addr:long)

Arguments

addr
The kernel address to retrieve the long from.

General Syntax

kernel_long:long(addr:long)

Description

Returns the long value from a given kernel memory address. Reports an error when reading from the given address fails.

Name

function::kernel_int — Retrieves an int value stored in kernel memory.

Synopsis

function kernel_int:long(addr:long)

Arguments

addr
The kernel address to retrieve the int from.

Description

Returns the int value from a given kernel memory address. Reports an error when reading from the given address fails.

Name

function::kernel_short — Retrieves a short value stored in kernel memory.

Synopsis

function kernel_short:long(addr:long)

Arguments

addr
The kernel address to retrieve the short from.

General Syntax

kernel_short:long(addr:long)

Description

Returns the short value from a given kernel memory address. Reports an error when reading from the given address fails.

Name

function::kernel_char — Retrieves a char value stored in kernel memory.

Synopsis

function kernel_char:long(addr:long)

Arguments

addr
The kernel address to retrieve the char from.

General Syntax

kernel_char:long(addr:long)

Description

Returns the char value from a given kernel memory address. Reports an error when reading from the given address fails.

Name

function::kernel_pointer — Retrieves a pointer value stored in kernel memory.

Synopsis

function kernel_pointer:long(addr:long)

Arguments

addr
The kernel address to retrieve the pointer from.

General Syntax

kernel_pointer:long(addr:long)

Description

Returns the pointer value from a given kernel memory address. Reports an error when reading from the given address fails.

Name

function::user_string — Retrieves string from user space.

Synopsis

function user_string:string(addr:long)

Arguments

addr
The user space address to retrieve the string from.

General Syntax

user_string:string(addr:long)

Description

Returns the null terminated C string from a given user space memory address. Reports “<unknown>” on the rare cases when userspace data is not accessible.

Name

function::user_string2 — Retrieves string from user space with alternative error string.

Synopsis

function user_string2:string(addr:long,err_msg:string)

Arguments

addr
The user space address to retrieve the string from.
err_msg
The error message to return when data isn't available.

General Syntax

user_string2:string(addr:long, err_msg:string)

Description

Returns the null terminated C string from a given user space memory address. Reports the given error message on the rare cases when userspace data is not accessible.

Name

function::user_string_warn — Retrieves string from user space.

Synopsis

function user_string_warn:string(addr:long)

Arguments

addr
The user space address to retrieve the string from.

General Syntax

user_string_warn:string(addr:long)

Description

Returns the null terminated C string from a given user space memory address. Reports “<unknown>” on the rare cases when userspace data is not accessible and warns (but does not abort) about the failure.

Name

function::user_string_quoted — Retrieves and quotes string from user space.

Synopsis

function user_string_quoted:string(addr:long)

Arguments

addr
The user space address to retrieve the string from.

General Syntax

user_string_quoted:string(addr:long)

Description

Returns the null terminated C string from a given user space memory address where any ASCII characters that are not printable are replaced by the corresponding escape sequence in the returned string. Reports “NULL” for address zero. Returns “<unknown>” on the rare cases when userspace data is not accessible at the given address.

Name

function::user_string_n — Retrieves string of given length from user space.

Synopsis

function user_string_n:string(addr:long,n:long)

Arguments

addr
The user space address to retrieve the string from.
n
The maximum length of the string (if not null terminated).

General Syntax

user_string_n:string(addr:long, n:long)

Description

Returns the C string of a maximum given length from a given user space address. Returns “<unknown>” on the rare cases when userspace data is not accessible at the given address.

Name

function::user_string_n2 — Retrieves string of given length from user space.

Synopsis

function user_string_n2:string(addr:long,n:long,err_msg:string)

Arguments

addr
The user space address to retrieve the string from.
n
The maximum length of the string (if not null terminated).
err_msg
The error message to return when data isn't available.

General Syntax

user_string_n2:string(addr:long, n:long, err_msg:string)

Description

Returns the C string of a maximum given length from a given user space address. Returns the given error message string on the rare cases when userspace data is not accessible at the given address.

Name

function::user_string_n_warn — Retrieves string from user space.

Synopsis

function user_string_n_warn:string(addr:long,n:long)

Arguments

addr
The user space address to retrieve the string from.
n
The maximum length of the string (if not null terminated).

General Syntax

user_string_n_warn:string(addr:long, n:long)

Description

Returns up to n characters of a C string from a given user space memory address. Reports “<unknown>” on the rare cases when userspace data is not accessible and warns (but does not abort) about the failure.

Name

function::user_string_n_quoted — Retrieves and quotes string from user space.

Synopsis

function user_string_n_quoted:string(addr:long,n:long)

Arguments

addr
The user space address to retrieve the string from.
n
The maximum length of the string (if not null terminated).

General Syntax

user_string_n_quoted:string(addr:long, n:long)

Description

Returns up to n characters of a C string from the given user space memory address where any ASCII characters that are not printable are replaced by the corresponding escape sequence in the returned string. Reports “NULL” for address zero. Returns “<unknown>” on the rare cases when userspace data is not accessible at the given address.

Name

function::user_short — Retrieves a short value stored in user space.

Synopsis

function user_short:long(addr:long)

Arguments

addr
The user space address to retrieve the short from.

General Syntax

user_short:long(addr:long)

Description

Returns the short value from a given user space address. Returns zero when user space data is not accessible.

Name

function::user_short_warn — Retrieves a short value stored in user space.

Synopsis

function user_short_warn:long(addr:long)

Arguments

addr
The user space address to retrieve the short from.

General Syntax

user_short_warn:long(addr:long)

Description

Returns the short value from a given user space address. Returns zero when user space and warns (but does not abort) about the failure.

Name

function::user_int — Retrieves an int value stored in user space.

Synopsis

function user_int:long(addr:long)

Arguments

addr
The user space address to retrieve the int from.

General Syntax

user_int:long(addr:long)

Description

Returns the int value from a given user space address. Returns zero when user space data is not accessible.

Name

function::user_int_warn — Retrieves an int value stored in user space.

Synopsis

function user_int_warn:long(addr:long)

Arguments

addr
The user space address to retrieve the int from.

General Syntax

user_ing_warn:long(addr:long)

Description

Returns the int value from a given user space address. Returns zero when user space and warns (but does not abort) about the failure.

Name

function::user_long — Retrieves a long value stored in user space.

Synopsis

function user_long:long(addr:long)

Arguments

addr
The user space address to retrieve the long from.

General Syntax

user_long:long(addr:long)

Description

Returns the long value from a given user space address. Returns zero when user space data is not accessible. Note that the size of the long depends on the architecture of the current user space task (for those architectures that support both 64/32 bit compat tasks).

Name

function::user_long_warn — Retrieves a long value stored in user space.

Synopsis

function user_long_warn:long(addr:long)

Arguments

addr
The user space address to retrieve the long from.

General Syntax

user_long_warn:long(addr:long)

Description

Returns the long value from a given user space address. Returns zero when user space and warns (but does not abort) about the failure. Note that the size of the long depends on the architecture of the current user space task (for those architectures that support both 64/32 bit compat tasks).

Name

function::user_char — Retrieves a char value stored in user space.

Synopsis

function user_char:long(addr:long)

Arguments

addr
The user space address to retrieve the char from.

General Syntax

user_char:long(addr:long)

Description

Returns the char value from a given user space address. Returns zero when user space data is not accessible.

Name

function::user_char_warn — Retrieves a char value stored in user space.

Synopsis

function user_char_warn:long(addr:long)

Arguments

addr
The user space address to retrieve the char from.

General Syntax

user_char_warn:long(addr:long)

Description

Returns the char value from a given user space address. Returns zero when user space and warns (but does not abort) about the failure.

Chapter 19. A collection of standard string functions

function::strlen — Returns the length of a string.
function::substr — Returns a substring.
function::stringat — Returns the char at a given position in the string.
function::isinstr — Returns whether a string is a substring of another string.
function::text_str — Escape any non-printable chars in a string.
function::text_strn — Escape any non-printable chars in a string.
function::tokenize — Return the next non-empty token in a string.
function::str_replace — str_replace Replaces all instances of a substring with another.
function::strtol — strtol - Convert a string to a long.
function::isdigit — Checks for a digit.
Functions to get the length, a substring, getting at individual characters, string seaching, escaping, tokenizing, and converting strings to longs.

Name

function::strlen — Returns the length of a string.

Synopsis

function strlen:long(s:string)

Arguments

s
the string

General Syntax

strlen: long (str:string)

Description

This function returns the length of the string, which can be zero up to MAXSTRINGLEN.

Name

function::substr — Returns a substring.

Synopsis

function substr:string(str:string,start:long,length:long)

Arguments

str
The string to take a substring from
start
Starting position. 0 = start of the string.
length
Length of string to return.

General Syntax

substr:string (str:string, start:long, stop:long)

Description

Returns the substring of the up to the given length starting at the given start position and ending at given stop position.

Name

function::stringat — Returns the char at a given position in the string.

Synopsis

function stringat:long(str:string,pos:long)

Arguments

str
The string to fetch the character from.
pos
The position to get the character from. 0 = start of the string.

General Syntax

stringat:long(srt:string, pos:long)

Description

This function returns the character at a given position in the string or zero if thestring doesn't have as many characters.

Name

function::isinstr — Returns whether a string is a substring of another string.

Synopsis

function isinstr:long(s1:string,s2:string)

Arguments

s1
String to search in.
s2
Substring to find.

General syntax

isinstr:long (s1:string, s2:string)

Description

This function returns 1 if string s1 contains s2, otherwise zero.

Name

function::text_str — Escape any non-printable chars in a string.

Synopsis

function text_str:string(input:string)

Arguments

input
The string to escape.

General Syntax

text_str:string (input:string)

Description

This function accepts a string argument, and any ASCII characters that are not printable are replaced by the corresponding escape sequence in the returned string.

Name

function::text_strn — Escape any non-printable chars in a string.

Synopsis

function text_strn:string(input:string,len:long,quoted:long)

Arguments

input
The string to escape.
len
Maximum length of string to return. 0 means MAXSTRINGLEN.
quoted
Put double quotes around the string. If input string is truncated it will have “...” after the second quote.

General Syntax

text_strn:string (input:string, len:long, quoted:long)

Description

This function accepts a string of designated length, and any ASCII characters that are not printable are replaced by the corresponding escape sequence in the returned string.

Name

function::tokenize — Return the next non-empty token in a string.

Synopsis

function tokenize:string(input:string,delim:string)

Arguments

input
String to tokenize. If NULL, returns the next non-empty token in the string passed in the previous call to tokenize.
delim
Token delimiter. Set of characters that delimit the tokens.

General Syntax

tokenize:string (input:string, delim:string)

Description

This function returns the next non-empty token in the given input string, where the tokens are delimited by characters in the delim string. If the input string is non-NULL, it returns the first token. If the input string is NULL, it returns the next token in the string passed in the previous call to tokenize. If no delimiter is found, the entire remaining input string is returned. It returns NULL when no more tokens are available.

Name

function::str_replace — str_replace Replaces all instances of a substring with another.

Synopsis

function str_replace:string(prnt_str:string,srch_str:string,rplc_str:string)

Arguments

prnt_str
The string to search and replace in.
srch_str
The substring which is used to search in prnt_str string.
rplc_str
The substring which is used to replace srch_str.

General Syntax

str_replace:string(prnt_str:string, srch_str:string, rplc_str:string)

Description

This function returns the given string with substrings replaced.

Name

function::strtol — strtol - Convert a string to a long.

Synopsis

function strtol:long(str:string,base:long)

Arguments

str
String to convert.
base
The base to use

General Syntax

strtol:long (str:string, base:long)

Description

This function converts the string representation of a number to an integer. The base parameter indicates the number base to assume for the string (eg. 16 for hex, 8 for octal, 2 for binary).

Name

function::isdigit — Checks for a digit.

Synopsis

function isdigit:long(str:string)

Arguments

str
String to check.

General Syntax

isdigit:long(str:string)

Description

Checks for a digit (0 through 9) as the first character of a string. Returns non-zero if true, and a zero if false.

Chapter 20. Utility functions for using ansi control chars in logs

function::ansi_clear_screen — Move cursor to top left and clear screen.
function::ansi_set_color — Set the ansi Select Graphic Rendition mode.
function::ansi_set_color2 — Set the ansi Select Graphic Rendition mode.
function::ansi_set_color3 — Set the ansi Select Graphic Rendition mode.
function::ansi_reset_color — Resets Select Graphic Rendition mode.
function::ansi_new_line — Move cursor to new line.
function::ansi_cursor_move — Move cursor to new coordinates.
function::ansi_cursor_hide — Hides the cursor.
function::ansi_cursor_save — Saves the cursor position.
function::ansi_cursor_restore — Restores a previously saved cursor position.
function::ansi_cursor_show — Shows the cursor.
Utility functions for logging using ansi control characters. This lets you manipulate the cursor position and character color output and attributes of log messages.

Name

function::ansi_clear_screen — Move cursor to top left and clear screen.

Synopsis

function ansi_clear_screen()

Arguments

None

General Syntax

ansi_clear_screen

Description

Sends ansi code for moving cursor to top left and then the ansi code for clearing the screen from the cursor position to the end.

Name

function::ansi_set_color — Set the ansi Select Graphic Rendition mode.

Synopsis

function ansi_set_color(fg:long)

Arguments

fg
Foreground color to set.

General Syntax

ansi_set_color(fh:long)

Description

Sends ansi code for Select Graphic Rendition mode for the given forground color. Black (30), Blue (34), Green (32), Cyan (36), Red (31), Purple (35), Brown (33), Light Gray (37).

Name

function::ansi_set_color2 — Set the ansi Select Graphic Rendition mode.

Synopsis

function ansi_set_color2(fg:long,bg:long)

Arguments

fg
Foreground color to set.
bg
Background color to set.

General Syntax

ansi_set_color2(fg:long, bg:long)

Description

Sends ansi code for Select Graphic Rendition mode for the given forground color, Black (30), Blue (34), Green (32), Cyan (36), Red (31), Purple (35), Brown (33), Light Gray (37) and the given background color, Black (40), Red (41), Green (42), Yellow (43), Blue (44), Magenta (45), Cyan (46), White (47).

Name

function::ansi_set_color3 — Set the ansi Select Graphic Rendition mode.

Synopsis

function ansi_set_color3(fg:long,bg:long,attr:long)

Arguments

fg
Foreground color to set.
bg
Background color to set.
attr
Color attribute to set.

General Syntax

ansi_set_color3(fg:long, bg:long, attr:long)

Description

Sends ansi code for Select Graphic Rendition mode for the given forground color, Black (30), Blue (34), Green (32), Cyan (36), Red (31), Purple (35), Brown (33), Light Gray (37), the given background color, Black (40), Red (41), Green (42), Yellow (43), Blue (44), Magenta (45), Cyan (46), White (47) and the color attribute All attributes off (0), Intensity Bold (1), Underline Single (4), Blink Slow (5), Blink Rapid (6), Image Negative (7).

Name

function::ansi_reset_color — Resets Select Graphic Rendition mode.

Synopsis

function ansi_reset_color()

Arguments

None

General Syntax

ansi_reset_color

Description

Sends ansi code to reset foreground, background and color attribute to default values.

Name

function::ansi_new_line — Move cursor to new line.

Synopsis

function ansi_new_line()

Arguments

None

General Syntax

ansi_new_line

Description

Sends ansi code new line.

Name

function::ansi_cursor_move — Move cursor to new coordinates.

Synopsis

function ansi_cursor_move(x:long,y:long)

Arguments

x
Row to move the cursor to.
y
Colomn to move the cursor to.

General Syntax

ansi_curos_move(x:long, y:long)

Description

Sends ansi code for positioning the cursor at row x and column y. Coordinates start at one, (1,1) is the top-left corner.

Name

function::ansi_cursor_hide — Hides the cursor.

Synopsis

function ansi_cursor_hide()

Arguments

None

General Syntax

ansi_cusor_hide

Description

Sends ansi code for hiding the cursor.

Name

function::ansi_cursor_save — Saves the cursor position.

Synopsis

function ansi_cursor_save()

Arguments

None

General Syntax

ansi_cursor_save

Description

Sends ansi code for saving the current cursor position.

Name

function::ansi_cursor_restore — Restores a previously saved cursor position.

Synopsis

function ansi_cursor_restore()

Arguments

None

General Syntax

ansi_cursor_restore

Description

Sends ansi code for restoring the current cursor position previously saved with ansi_cursor_save.

Name

function::ansi_cursor_show — Shows the cursor.

Synopsis

function ansi_cursor_show()

Arguments

None

General Syntax

ansi_cursor_show

Description

Sends ansi code for showing the cursor.
Static Wikipedia 2008 (no images)

aa - ab - af - ak - als - am - an - ang - ar - arc - as - ast - av - ay - az - ba - bar - bat_smg - bcl - be - be_x_old - bg - bh - bi - bm - bn - bo - bpy - br - bs - bug - bxr - ca - cbk_zam - cdo - ce - ceb - ch - cho - chr - chy - co - cr - crh - cs - csb - cu - cv - cy - da - de - diq - dsb - dv - dz - ee - el - eml - en - eo - es - et - eu - ext - fa - ff - fi - fiu_vro - fj - fo - fr - frp - fur - fy - ga - gan - gd - gl - glk - gn - got - gu - gv - ha - hak - haw - he - hi - hif - ho - hr - hsb - ht - hu - hy - hz - ia - id - ie - ig - ii - ik - ilo - io - is - it - iu - ja - jbo - jv - ka - kaa - kab - kg - ki - kj - kk - kl - km - kn - ko - kr - ks - ksh - ku - kv - kw - ky - la - lad - lb - lbe - lg - li - lij - lmo - ln - lo - lt - lv - map_bms - mdf - mg - mh - mi - mk - ml - mn - mo - mr - mt - mus - my - myv - mzn - na - nah - nap - nds - nds_nl - ne - new - ng - nl - nn - no - nov - nrm - nv - ny - oc - om - or - os - pa - pag - pam - pap - pdc - pi - pih - pl - pms - ps - pt - qu - quality - rm - rmy - rn - ro - roa_rup - roa_tara - ru - rw - sa - sah - sc - scn - sco - sd - se - sg - sh - si - simple - sk - sl - sm - sn - so - sr - srn - ss - st - stq - su - sv - sw - szl - ta - te - tet - tg - th - ti - tk - tl - tlh - tn - to - tpi - tr - ts - tt - tum - tw - ty - udm - ug - uk - ur - uz - ve - vec - vi - vls - vo - wa - war - wo - wuu - xal - xh - yi - yo - za - zea - zh - zh_classical - zh_min_nan - zh_yue - zu -

Static Wikipedia 2007 (no images)

aa - ab - af - ak - als - am - an - ang - ar - arc - as - ast - av - ay - az - ba - bar - bat_smg - bcl - be - be_x_old - bg - bh - bi - bm - bn - bo - bpy - br - bs - bug - bxr - ca - cbk_zam - cdo - ce - ceb - ch - cho - chr - chy - co - cr - crh - cs - csb - cu - cv - cy - da - de - diq - dsb - dv - dz - ee - el - eml - en - eo - es - et - eu - ext - fa - ff - fi - fiu_vro - fj - fo - fr - frp - fur - fy - ga - gan - gd - gl - glk - gn - got - gu - gv - ha - hak - haw - he - hi - hif - ho - hr - hsb - ht - hu - hy - hz - ia - id - ie - ig - ii - ik - ilo - io - is - it - iu - ja - jbo - jv - ka - kaa - kab - kg - ki - kj - kk - kl - km - kn - ko - kr - ks - ksh - ku - kv - kw - ky - la - lad - lb - lbe - lg - li - lij - lmo - ln - lo - lt - lv - map_bms - mdf - mg - mh - mi - mk - ml - mn - mo - mr - mt - mus - my - myv - mzn - na - nah - nap - nds - nds_nl - ne - new - ng - nl - nn - no - nov - nrm - nv - ny - oc - om - or - os - pa - pag - pam - pap - pdc - pi - pih - pl - pms - ps - pt - qu - quality - rm - rmy - rn - ro - roa_rup - roa_tara - ru - rw - sa - sah - sc - scn - sco - sd - se - sg - sh - si - simple - sk - sl - sm - sn - so - sr - srn - ss - st - stq - su - sv - sw - szl - ta - te - tet - tg - th - ti - tk - tl - tlh - tn - to - tpi - tr - ts - tt - tum - tw - ty - udm - ug - uk - ur - uz - ve - vec - vi - vls - vo - wa - war - wo - wuu - xal - xh - yi - yo - za - zea - zh - zh_classical - zh_min_nan - zh_yue - zu -

Static Wikipedia 2006 (no images)

aa - ab - af - ak - als - am - an - ang - ar - arc - as - ast - av - ay - az - ba - bar - bat_smg - bcl - be - be_x_old - bg - bh - bi - bm - bn - bo - bpy - br - bs - bug - bxr - ca - cbk_zam - cdo - ce - ceb - ch - cho - chr - chy - co - cr - crh - cs - csb - cu - cv - cy - da - de - diq - dsb - dv - dz - ee - el - eml - eo - es - et - eu - ext - fa - ff - fi - fiu_vro - fj - fo - fr - frp - fur - fy - ga - gan - gd - gl - glk - gn - got - gu - gv - ha - hak - haw - he - hi - hif - ho - hr - hsb - ht - hu - hy - hz - ia - id - ie - ig - ii - ik - ilo - io - is - it - iu - ja - jbo - jv - ka - kaa - kab - kg - ki - kj - kk - kl - km - kn - ko - kr - ks - ksh - ku - kv - kw - ky - la - lad - lb - lbe - lg - li - lij - lmo - ln - lo - lt - lv - map_bms - mdf - mg - mh - mi - mk - ml - mn - mo - mr - mt - mus - my - myv - mzn - na - nah - nap - nds - nds_nl - ne - new - ng - nl - nn - no - nov - nrm - nv - ny - oc - om - or - os - pa - pag - pam - pap - pdc - pi - pih - pl - pms - ps - pt - qu - quality - rm - rmy - rn - ro - roa_rup - roa_tara - ru - rw - sa - sah - sc - scn - sco - sd - se - sg - sh - si - simple - sk - sl - sm - sn - so - sr - srn - ss - st - stq - su - sv - sw - szl - ta - te - tet - tg - th - ti - tk - tl - tlh - tn - to - tpi - tr - ts - tt - tum - tw - ty - udm - ug - uk - ur - uz - ve - vec - vi - vls - vo - wa - war - wo - wuu - xal - xh - yi - yo - za - zea - zh - zh_classical - zh_min_nan - zh_yue - zu -

Sub-domains

CDRoms - Magnatune - Librivox - Liber Liber - Encyclopaedia Britannica - Project Gutenberg - Wikipedia 2008 - Wikipedia 2007 - Wikipedia 2006 -

Other Domains

https://www.classicistranieri.it - https://www.ebooksgratis.com - https://www.gutenbergaustralia.com - https://www.englishwikipedia.com - https://www.wikipediazim.com - https://www.wikisourcezim.com - https://www.projectgutenberg.net - https://www.projectgutenberg.es - https://www.radioascolto.com - https://www.debitoformtivo.it - https://www.wikipediaforschools.org - https://www.projectgutenbergzim.com

Static Wikipedia 2008 (March - no images)

aa - ab - als - am - an - ang - ar - arc - as - bar - bat_smg - bi - bug - bxr - cho - co - cr - csb - cv - cy - eo - es - et - eu - fa - ff - fi - fiu_vro - fj - fo - frp - fur - fy - ga - gd - gl - glk - gn - got - gu - gv - ha - hak - haw - he - ho - hr - hsb - ht - hu - hy - hz - ia - id - ie - ig - ii - ik - ilo - io - is - it - iu - jbo - jv - ka - kab - kg - ki - kj - kk - kl - km - kn - ko - kr - ks - ksh - ku - kv - kw - ky - la - lad - lb - lbe - lg - li - lij - lmo - ln - lo - lt - lv - map_bms - mg - mh - mi - mk - ml - mn - mo - mr - ms - mt - mus - my - mzn - na - nah - nap - nds - nds_nl - ne - new - ng - nn -

Liber Liber 2023 - Authors

abati - abba - abbate - accademia_degli_intronati - accati - accetto - acerbi - adami - agabiti - agamennone - aganoor - agaraff - agostini - agraives - agresti - agrippa - alamanni - albergati_capacelli - albert - albertazzi - albertelli - alberti - alberti_leandro - alberti_tommaso - albini - albinoni - albori_della_vita_italiana - alcott - aleardi - alfa - alfieri - algarotti - ali - alighieri - alighieri_jacopo - allen - aloysius - amabile - amalteo - amari - amati - ambrogini - amidei - amodeo - andersen - anderson - andrea_da_barberino - andreis - angiolieri - angiolini - anile - anonimo - antiquarie_prospettiche_romane - antoccia - antona_traversi - antonelli - appelius - apuleius - aragona - arbib - archinti - arenskij - aretino - ariosto - aristoteles - armaroli - aroldi - arouet - arrhenius - arrieta - arrighi - arrigoni - arsinov - artom - artusi - atlante - auber - audran - auto_da_fe_in_bologna - avancini - azeglio - bacci - baccini - bacci_peleo - bach - bachi - bachi_riccardo - bachofen - bach_carl_philipp_emanuel - bach_johann_bernhard - bach_johann_ludwig - bach_wilhelm_friedemann - bacigalupo - badia_y_leblich - baffo - bakunin - balakirev - balbo - balbo_italo - baldacci - balsamo - balzac - balzani - banchieri - bandello - bandi - baratono - baratono_adelchi - barbagallo - barbaranelli - barbarani - barbarich - barberini - barbiera - barbieri - barbieri_francisco - barbusse - barella - bargiacchi - baricelli - barla - barni - barrie - barrili - bartok - bartoli - bartoli_daniello - barzini - basile - bassano - bassano_anthony - bastianelli - baudelaire - baunard - bazzero - bazzoni - becattini - beccari - beccaria - beccaria_antonella - beckford - beethoven - belgioioso - belgiojoso - bellacchi - bellani - belli - bellini - belloc_lowndes - bellone - belo - beltrame - beltramelli - bembo - benaglio - benamozegh - benco - benco_delia - benedetti - benelli - beolco - berchet - berchet_guglielmo - berg - berlioz - bernard - bernardino_da_siena - berneri - berneri_camillo - berneri_maria_luisa - berni - bersezio - bertacchi - bertacchi_cosimo - bertelli - berti - bertinetti - bertini - bertola - bertoni - bertoni_brenno - bertoni_luigi - berwald - besana - bestiario_moralizzato - betteloni - betti - bettinelli - bettoni - bevilacqua - beyle - bhagavad_gita - biagi - bianchi - bianchi_giovini - bianco - bianconi - bianconi_giovanni_lodovico - bibbia - bibbiena - biber - biffoli - binazzi - bini - biografie_e_ritratti_d_illustri_siciliani - bisciola - bisi - bizet - bizzarri - bizzozero - blackwood - blake - blanch - blanchard - blaserna - boccaccio - boccalini - boccardi - boccardo - boccherini - bocchi - bodrero - boerio - boghen_conegliani - boiardo - boieldieu - boine - boito - boito_a - bolza - bon - bonacini - bonaparte - bonarelli - bonatelli - bonaventura - bonaventura_enzo - bond - bonfadini - bonghi - bonizzi - bonola - bonomo - bonvesin_de_la_riva - bordenave - borgese - borgese_giuseppe - borghi - borghi_armando - borodin - borri - bortolotti - boschetti_alberti - boscovich - bosio - bossi - botta - bottazzi - bottero - bouchardy - bourcet - bourdet - bouvier - bovio - bovio_libero - bozzano - bozzini - bracco - brahms - brancaccio - brera - bresadola - breton - brocchi - brofferio - broglio - bronte - bronzino - bruch - bruckner - bruna - brunelli - brunetti - bruni - bruni_giuseppe - bruno - brusoni - bufardeci - buia - buonaiuti - buonarroti - buonarroti_il_giovane - buoninsegni - buozzi - burchiello - burckhardt - burke - burnaby - burroughs - burzio - buschi - busetto - busoni - butti - buxtehude - buzzanca - byrne - byron - caccianiga - cacciatore - caccini - cafiero - cagna - cagni - cajkovskij - calandra - calcagno - caldarella - calestani - calvo - calza - camillo - camis - cammarano - camoes - campana - campanella - campolonghi - campra - canestrini - canestrini_alessandro - canina - cannabich - cannizzaro - cantalupo - cantoni - cantoni_giovanni - canto_gregoriano - cantu - capasso - capefigue - capella - capocci - capparoni - capponi - capranica - caprile - capuana - carabellese - caracciolo - caracciolo_enrichetta - carafa_capecelatro - carcano - cardano - cardile - carducci - carlyle - carmina_burana - carnevali - carocci - carpenter - carrera - carroll - carubia - casadei - casanova - casas - cassini - castelli - castelli_david - castelnuovo - castelvetro - casti - castiglione - castiglioni - catalani - caterina_da_siena - cather - cattaneo - cava - cavalcanti - cavallotti - cavara - caversazzi - caviglia - cefali - celesia - cellini - celoria - cena - cenni - cennini - cerlone - cernysevskij - cerro - cervantes - cervesato - cesarotti - cesi - chabrier - chanson_de_roland - chapi - charpentier - chaucer - chausson - chelli - cherubini - cherubini_eugenio - chesterton - cheyney - chiabrera - chiara - chiarelli - chiaretti - chiarini - chiesa - chigi - chiocchetti - chiosso - chiurlo - chopin - christiansen - chueca - ciaceri - ciamician - ciampoli - cian - ciano - cicero - cicogna - cielo - cifra - cimarosa - cinelli - cipriani - cittadella - claps - clarke - clementi - club_alpino_italiano - cocchi - codemo - coffa_caruso - coglitore - colagrossi - colajanni - coleridge - collenuccio - colletta - collins - collodi - colombe - colombo_fernando - colombo_michele - colonna - colonna_vittoria - colorni - columba - cominelli - compagni - compagnia_del_mantellaccio - comparetti - confucius - contessa_lara - conti - coperario - coppi - corano - corbino - cordelia - corelli - coresio - corio - cornaro - cornelius - cornoldi - corradini - cortesi - cosmi - cossa - costa - costa_andrea - coster - couperin - crawford - crawford_morris - cremonese - crispi - croce - crocella - croce_benedetto - croce_enrico - cronica_vita_di_cola_di_rienzo - cucca - cummins - cuneo - cuoco - cuomo - curiel - curti - curti_pier_ambrogio - cusani - cyrano_de_bergerac - dadone - dall_ongaro - dalmasso - dandrieu - danti - darwin - darwin_erasmus - daudet - dauli - da_ponte - da_porto - da_verona - debay - debenedetti - debussy - deledda - delibes - delius - della_casa - della_chiesa - della_porta - della_seta - della_valle - della_valle_pietro - delpino - del_lungo - del_lungo_carlo - dering - desanctis - descalzo - descartes - descuret - despres - devienne - dewey - de_amicis - de_angelis - de_astis - de_blasio - de_boni - de_bosis - de_cesare - de_cleyre - de_filippi - de_foe - de_franchi - de_gamerra - de_giovanni - de_gubernatis - de_marchi - de_maria - de_orestis - de_paoli - de_pellegrini - de_pretto - de_quincey - de_roberto - de_rubris - de_ruggiero - de_sanctis - de_vries - diabelli - diamante - dickens - diderot - difensore_degli_ebrei - dini - dito - dittersdorf - di_blasi - di_genio - di_giacomo - di_giovanni - di_giovanni_alessio - di_grazia - di_monaco - di_san_giusto - dolce - domenichi - donati - donaver - doni - donizetti - dorso - dossi - dostoevskij - douhet - doyle - draeseke - driesch - drigo - drosso - ducati - dukas - dumas - dunant - duparc - durante - du_mage - dvorak - d_albert - d_ambra - d_ancona - d_andrea - d_annunzio - d_arzo - d_emilio - d_india - eco - economisti_del_cinque_e_seicento - eisner - electronic_frontier_foundation - elgar - elia - emanuelli - emerson - emiliani_giudici - emma - emmanuel - engels - enriques - epictetus - epicurus - erasmus_roterodamus - eredia - ermacora - errante - errera - euclides - fabbri - fabiani - fabula_de_etc - faldella - fanciullacci - fanciulli - fanfani - fantazzini - fantoni - farga - fargion - farina - farinelli - farnaby - faure - favaro - fazello - federici - fernandez_caballero - fernandez_guardia - ferrabosco_il_giovane - ferrari - ferrari_carlotta - ferrari_giuseppe - ferrari_giuseppe_1720 - ferrari_paolo - ferrari_pietro - ferrari_pio_vittorio - ferrari_severino - ferrer - ferrero - ferretti - ferri - ferrieri - ferri_dina - ferri_giustino - ferroni - ferruggia - feuerbach - fiacchi - fibich - figner - figuier - filicaia - filippi - fillak - filopanti - finella - fioravanti - fioretti_di_san_francesco - fiore_di_leggende_cantari_antichi_etc - fiorini - firenzuola - flammarion - flaubert - fletcher - flies - florenzi - florio - flotow - fogazzaro - folengo - folgore - fontana - fontanarosa - fontane - fontefrancesco - fontenelle - formichi - fornaciari - forteguerri - fortis - foscolo - fraccacreta - fracchia - france - francesco_d_assisi - franchetti - franck - franco - frari - freud - frezzi - frugoni - fucini - fugassa - funck_brentano - gabetti - gabrieli - gabrieli_giovanni - galassi - galiani - galilei - gallaccini - galleani - galleria_palatina - gallina - gallo - galuppi - gamberi - gandhi - ganot - gargiulo - garibaldi - garrone - gatti - gautier - geminiani - gentile - gentile_iginio - gerard - geremicca - gerli - german - gershwin - gervasoni - gherardi - ghersi - ghislanzoni - ghisleri - giaccani - giacometti - giacosa - giamboni - gianelli - giannone - gibbon - gibellini - gide - gigli - giglioli - gille - gilles - ginzburg - gioberti - giolitti - giordana - giordano - giornale_per_i_bambini - giostra_delle_virtu_e_dei_vizi - giovannetti - giovannitti - giovio - giraud - giraudoux - giretti - giribaldi - giuseppe_da_forio - giusta_idea - giusti - glazunov - glinka - gluck - gobetti - goethe - gogol - goldoni - goldsmith - golgi - goll - gomes - gonin - gori - gori_pietro_1854_1930 - gorkij - gossec - gothein - gounod - gozzano - gozzi - gozzi_gasparo - graf - gramsci - granados - grande - grandi - grassi - grasso - grave - gray - graziani - gregorovius - gretry - grieg - grimaldi - grimm_jakob - grippa - grossi - grossi_vincenzo - groto - guadagnoli - gualandris - gualdo - guardione - guareschi - guarini - guelfi - guerrazzi - guerrini - guglielminetti - guglielmotti - guicciardini - guidetti - guidi - guidiccioni - guidi_michelangelo - guiducci - gulli - guy - haeckel - haendel - hamsun - harding - hasse - hauptmann - hawthorne - haydn - heron - herschel - hewlett - heywood - hichens - historia_di_papa - holborne - holst - homerus - hubay - huch - hugo - hummel - humperdinck - huxley - iacopone_da_todi - iacopo_da_sanseverino - iberti - ibn_gubayr - ibn_miskawayh - ibsen - imbriani - indy - ingrassia - innocentius_papa_12 - intorcetta - invernizio - ippolita_comunita_di_scriventi - ippolitov_ivanov - issel - istoria_critica - italia - jacobsen - james - janacek - jarro - jatta - jeans - jefferson - jenna - jennings - jerome - johansson - johnson - joinville - jolanda - joplin - jovine - joyce - juvalta - kaffka - kahn - kalevala - kalidasa - kant - karr - keynes - kipling - kleist - kollo - komzak - kovalevskaja - kropotkin - labriola - ladenarda - lady_gregory - lafargue - lagerlof - lalande - lalli - lalo - lancillotti - lando - landriani - lanzalone - lao_tzu - lasca - laser - lasso - latini - lattes - lattes_dante - lavater - lawrence - lazzarelli - lazzaretti - lazzeri - la_boetie - la_fontaine - la_lumia - leetherland - leggenda_di_tristano - legouve - lehar - leibniz - leitgeb - lemery - lemonnier - lenti_boero - leonardo - leoncavallo - leoni - leopardi - leroux - lesca - lessig - lessona - lettera_a_diogneto - levati - levi - levi_adolfo - levi_giulio_augusto - lewis - libri_piu_letti - libro_della_cucina - liebig - liesegang - liguria - linati - lipparini - lippi - liszt - littre - lizio_bruno - ljadov - lleo - locatelli - lockyer - lodi - lomazzo - lombardini - lombroso - lombroso_gina - london - longo - longus_sophista - lopez - lorentz - lorenzo - lorenzoni - lori - loria - lortzing - lo_valvo - lucatelli - lucchesini - lucianus - lucini - lucretius - luigini_federico - luini - lully - luna - lupo - lusitania - luther_blissett - luzio - macaulay - maccrie - machiavelli - mackay - maes - maeterlinck - maffei - magalotti - maggi - mahler - maineri - maistre - malamani - malatesta - malinverni - malon - malpassuti - mameli - mamiani - mannarino - manni - manno - mannu - mantegazza - manucci - manzoni - marais - marcelli - marcello - marchand - marchesani - marchesa_colombi - marchetti - marchi - marconi - maresca - mariani - marinelli - marinetti - marino - mario - marrama - marselli - marsili - martello - martineau - martinelli - martinelli_vincenzo - martinetti - martini - martini_ferdinando - martoglio - martucci - marugi - marx - mascagni - masci - masi - massarani - massenet - massimi - mastriani - mastro_titta - mattei - matteucci - mattirolo - maupassant - mazzarino - mazzini - medici - medici_ferdinando_i - medici_lorenzino - mehul - meli - melville - mendelssohn - menghini - mengozzi - merlini - merlino - messa_di_requiem - messina - metastasio - meyer - meyerbeer - meyrink - micanzio - michaelis - michel - michelstaedter - mieli - milani - mill - mille_e_una_notte - milton - mioni - mirbeau - misasi - misefari - moderata_fonte - modigliani - molinari - molnar - mommsen - monchablon - mondaini - moneta - mongai - mongitore - monicelli - monnier - montanelli - montesquieu - montessori - monteverde - monteverdi - monti - monti_achille - montpensier - moore - morandi - morandi_carlo - morando - morasso - more - moresco - moretti - morra - morris - morselli - morselli_ercole - mosca - moscardelli - mosso - mozart - mozzoni - mudge - mulazzi - mule - mule_bertolo - munthe - mura - muratori - muratori_lodovico - murger - murri - musorgskij - mussolini - musumeci - muzzi - nagy - nardini - narrazione_critico_storica_etc - natale - navigazione_di_san_brandano - nazioni_unite - neera - negri - negri_ada - negri_francesco - negri_gaetano - nencioni - nerucci - nettlau - nibby - nibelunghi - niccolini - nicolai - nicolaus_cusanus - nielsen - nieri - nietzsche - nievo - nivers - nobili - nordau - nordhoff - norsa - nota - notari - notturno_napoletano - novacek - novaro - novaro_mario - novatore - novella_del_grasso_legnajuolo - novelle_cinesi - novelle_indo_americane - novelle_italiane_dalle_origini_al_cinquecento - novellino - nucera_abenavoli - nuovi_misteri_del_chiostro_napoletano_etc - offenbach - ojetti - olper_monis - omodeo - onesto - oppenheim - orestano - oriani - orsi - orsini - ortolani - pachelbel - pacini - pacioli - padoa - padula - pagani - paganini - pagliaro - pailleron - paisiello - palazzi - paleologue - palladio - pallavicini - pallavicino - palli_bartolommei - palma - palmeri - palomba - pananti - pani - pannocchieschi - panzacchi - panzini - paolieri - pareto - parini - paris - parlatore - parmeggiani - pascal - pascal_carlo - pascarella - pascoli - pasinetti - pasolini - paterno - pausanias - pavese - peano - pellico - pellizzari - penzig - pepoli - percoto - pergolesi - perlman - perodi - perrault - petrarca - petrocchi - petruccelli_della_gattina - piave - piazza - piazza_antonio - piazzi - pico_della_mirandola - pierantoni_mancini - pieri - pierne - pigafetta - pignata - pinamonti - pinchetti - pindemonte - pino - pintor - pinza - pioda - piola - pirandello - pisacane - piscel - pissilenko - pitre - piva - pizzagalli - pizzigoni - pizzigoni_giuseppina - pizzirani - planche - plato - plinius_caecilius_saecundus - podesta - podrecca - poe - poli - polidori - polidori_francesco - polimanti - poliziano - polo - polybius - pompilj - ponchielli - popper - porati - porta - pov_ray_team - pozzi - pozzi_antonia - praetorius - praga - praga_marco - prati - previati - prevost - prose_e_poesie_giapponesi - proudhon - proust - prunas - puccini - puini - pulci - purcell - purgotti - puskin - puviani - quadrio - quel_libro_nel_cammino_della_mia_vita - quevedo - rabelais - rabizzani - raccolta_di_lettere_ecc - racconti_popolari_dell_ottocento_ligure - rachmaninov - racquet - radcliffe - raffaello_sanzio - raga - ragazzoni - rajberti - rajna - ramazzini - rameau - ramusio - randi - ranieri - rapisardi - rastrelli - ravagli - ravel - razzaguta - reclus - redi - regaldi - regalia - reger - reghini - regina_di_luanto - regnani - regno_d_italia_1805_1814 - reinecke - relazione_dell_atto_della_fede_etc - renan - renier_michiel - rensi - repubblica_romana_1849 - respighi - retif_de_la_bretonne - reuze - reyer - rezzonico - ricchi - ricchieri - ricci - ricci_paterno_castello - ricci_umberto - riccoboni - righetti - righi - rignano - rilke - rimatori_siculo_toscani_del_dugento - rime_dei_memoriali_bolognesi - rimini - rimskij_korsakov - rinaldini - ringhieri - ripa - ripamonti - rizzatti - roberti - robida - rocca - roccatagliata_ceccardi - rocca_enrico - rocco - roggero - rohlfs - rolando - romagnoli - romagnoli_augusto - romani - roma_e_la_opinione_etc - romberg - romussi - roncaglia_gino - rosa - rosadi - rosa_daniele - rose - rosetti - rosi - rosmini - rosselli_carlo - rosselli_nello - rossi - rossini - rossi_emanuele - rossi_giovanni - rostand - rousseau - roussel - rovani - rovetta - rubinstejn - ruffini - ruffini_francesco - russo - russolo - ruzzante - ryner - sabatini - sabatini_rafael - sabbadini - sacchetti - sacchetti_roberto - sacchi - sacheli - sacher_masoch - saffi - saffi_antonio - saint_evremond - saint_saens - salanitro - salfi - salgari - salimbene_da_parma - sallustius - salucci - saluzzo_roero - sangiorgio - sannazaro - santucci - sanudo - sanvittore - sarasate - sardegna_regno - saredo - sarno - sarpi - satta - savarese - savasta - savinio - savio - savioli - savi_lopez - savonarola - scarfoglio - scarlatti - scarpetta - scarpetta_maria - scartabellati - schein - schiaparelli - schiavini - schicchi - schiller - schioppa - schmid - schmidt - schopenhauer - schubert - schumann - schutz - schwarz - scilla - scina - scott - scrofani - scuto - sebastian - secchi - sella - seneca - serafini - serafino_aquilano - serao - sercambi - serena - serge - sergi - serra - servi - settembrini - sfinge - sforza - shakespeare - shaw - shelley - sicilia - siciliani - sidrac - sienkiewicz - sigonio - siliprandi - silva - simpson - sinding - sismondi - skrjabin - slataper - smetana - sobrero - sobrero_mario - socci - soler - solera - solmi - solovev - sommerfeld - sonzogno - sophocles - sorbelli - spampanato - spaventa - spaventa_filippi - sperani - speroni - spinazzola - spinelli - spinoso - spinoza - spohr - spontini - stacpoole - stael - stampa - statius - stefanoni - stein - steiner - stendhal - stenhammar - steno - stephens - sterne - stevenson - stewart - stirner - stoker - storia_dei_paladini_di_francia - storia_di_fra_michele_minorita - stowe - straparola - strauss - strauss_josef - strauss_jr - strauss_richard - strenna_di_ascolti_per_il_natale - stromboli - suk - sullivan - supino - suppe - supplica_degli_stampatori_e_etc - suzzara_verdi - svendsen - svevo - swift - sylos_labini - synge - szanto - szymanowski - tagore - tanini - tanini_alighiero - tarabotti - tarchetti - targioni_tozzetti - tartaglia - tartini - tartufari - tassini - tasso - tassoni - telemann - teloni - tempio - tenca - terentius - tesoro_di_scienze_etc - tessa - testoni - tettoni - theuriet - tholozan - thomas - thoreau - thorpe - thouar - thovez - thucydides - tigri - tilgher - timmermans - timpanaro - tiraboschi - titelouze - tocco - tolstoj - tomei - tommaseo - torelli - torelli_luigi - torricelli - tosco - tosti - tozzi - traina - trebbi - treitschke - trentin - tresca - trilussa - trimmer - troya - tucci - tumiati - turco - turgenev - ubaldini - uccellini - uda - ughetti - ultimi_fatti_di_milano - unesco - unione_europea - untersteiner - urgnani - vailati - valera - valery - vallardi - valles - valletta - valli - valvason - vannicola - vanzetti - varthema - varvaro - vasari - vassallo - vaticano - venerandi - venexiana - veneziani - venier - veniero - venosta - venturi - venturini - venturi_adolfo - verdi - verdinois - verdi_de_suzzara - veresaev - verga - vergilius - verne - veronese - verri_alessandro - verri_pietro - vertua - vettori - viaggi_di_gio_da_mandavilla - viani - vico - vieuxtemps - vigoni - villa - villabianca - villani - villani_matteo - villari - villiers_de_l_isle_adam - vinci - violante - viotti - viriglio - viscnu_sarma - vismara - vitali - vita_delitti - vita_italiana_nel_cinquecento - vita_italiana_nel_rinascimento - vita_italiana_nel_risorgimento - vita_italiana_nel_seicento - vita_italiana_nel_settecento - vita_italiana_nel_trecento - vitruvius - vivaldi - vivante - vivanti - vives - viviani - viviani_raffaele - vogue_melchior_de - volin - volpi - volta - voltaire - volterra - wagenaar - wagner - waldteufel - wallace - wallace_edgar - wallace_lewis - walpole - wassermann - weber - wells - wessely - white_mario - widmann - wieniawski - wilde - wolf - wolf_ferrari - woolf - world_wide_web_consortium - wundt - wu_ming - wu_ming_1 - wu_ming_2 - wu_ming_5 - yambo - yeats - yriarte - zagarrio - zanazzo - zandonai - zanella - zanghi - zanotelli - zavattero - zena - zhuang_zi - zola - zuccoli -